Replacement Adhesive Velcro Strip for Access Tonneau Covers - 16' Long x 1-1/4" Wide
(50 reviews)
Price: $24.90
Replacement Adhesive Velcro Strip for Access Tonneau Covers - 16' Long x 1-1/4" Wide
Item # A20790
Retail:$35.03
Our Price: $24.90
You Save: 29%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (50)
- Q & A (0)
- Videos (1)
- Photos
Access Accessories and Parts - A20790
- Tonneau Covers
- Fasteners
- Access
Replaces 1 adhesive velcro strip for your Access tonneau cover. 16' Long x 1-1/4" wide.
Features:
- Replaces the adhesive velcro strip for your Access tonneau cover
- Installs along the bedrail of your tonneau cover
- Includes 1 adhesive strip
- Dimensions: 16' long x 1-1/4" wide
20790 Replacement Adhesive Velcro Strip for Access Tonneau Covers - 16' Long x 1-1/4" Wide
California residents: click here
Video of Replacement Adhesive Velcro Strip for Access Tonneau Covers - 16' Long x 1-1/4" Wide
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Access - Tonneau Covers - A20790
Today we're going to take a look at the 16 foot long Replacement Adhesive Velcro Strip for the Access Tonneau Covers. This part will replace the adhesive Velcro strip for your Access tonneau covers. It installs along the bedrail of your tonneau cover. This part includes everything laid out here on the table. The one adhesive strip, the four pop rivets, two alcohol pads and a nice set of detailed instructions.Again the length on this is 16 feet with on the hook section is one and one quarter inches wide. Basically when you go to install this what you'll do is drill out the existing rivets on each end of your existing rails, peel off the old hook tape and glue and then clean the area with these alcohol pads that they include.
Apply this new hook tape. Just lay it down, peel that off to stick to it and then install the new rivets at each end of the rails and you're all ready to go.That should do it for the review on the 16 foot long replacement adhesive Velcro strip for the Access tonneau covers.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Adhesive Velcro Strip for Access Tonneau Covers - 16' Long x 1-1/4" Wide - A20790
Average Customer Rating: 4.7 out of 5 stars (50 Customer Reviews)
Replaces 1 adhesive velcro strip for your Access tonneau cover. 16' Long x 1-1/4" wide.by: John 10/22/2022
Great product works well, Great people to work with. Will definitely buy from them again!!
by: Bradley02/10/2019
Worked fine for like a month and then started to peel up I had to use rivets every 6 inches so it would kinda work. I probably wouldn’t buy it again.
by: Andy08/08/2023
Great quality fast delivery. Thanks
by: Scott 04/17/2021
This product did exactly what I needed. The velcro on my Lund truck bed cover was in need of replacement, and this fit perfectly. At first I tried to remove the old glue, but after failing at that, using brake cleaner made the old glue tacky enough that combined with the adhesive on the new tape, it adhered quite well. Its been holding well for about 8 months so far.
by: Kelvin 06/13/2023
After the old one was removed the new strips on very well and seem to be working
by: Joel M.04/24/2018
We ordered replacement velcro for our access tonneau cover. The velcro came it was a perfect fit easy to put on easy to follow the instructions. Looks like Factory work very pleased with the product and very pleased with the fast shipping. Will be looking to see what other things I can order to keep my truck looking new.
by: Jim07/12/2018
The velcro strip that slides into the rails on my Tacoma bed for my soft top fit perfectly and the price was right. Only took a few minutes to install. I've always had good experiences with etrailer and would highly recommend them.
by: Richard 05/16/2023
The product was just as described and fit perfectly. The staff that took mh call were extremely knowledgeable and extremely helpful.
by: Bill02/12/2018
Just what I needed for my tonneau cover . Glad I found etrailer the other site I found the product to be two dollars higher and their shipping was 16.00 . etrailer had a lower product price and less expensive shipping.
by: Timothy01/09/2018
Due to weather conditions, delivery took a little bit longer than projected, but otherwise was exactly what I expected.
I just finished installing the velcro strips this afternoon.
Installation instruction was good and it went on easily.
by: Marilyn 09/12/2019
Haven't yet installed the product, but happy that you had the correct width & length hook & loop tape replacement to fit/secure our tonneau cover. Thank you!
by: David10/02/2020
Great Replacement Part Thanks !!!
David M.
10/3/2021
Great no problems yet
by: Craig 01/11/2023
Shipping was fast, product is what was stated, and once I can let my truck warm up in the shed, I’ll install
by: Dale05/06/2018
Product was exactly what I was looking for. Shipping time was excellent,would recommend this co. to anyone Thank You
by: Joe 01/22/2023
Item was delivered quickly. Fit my cover rails perfectly.
by: Joey05/13/2018
Product was delivered early and exactly what I needed. Did not disappoint and worked perfectly on my cover.
Thank You
by: Timothy01/20/2019
Great product, better than OEM it replaces. Sonic shipping. Easy ordering. Will definitely order from Etrailer again!!
by: Andrew05/31/2019
Perfect replacement for my worn velcro.
by: Michael 11/30/2022
Made sure my rail was very clean it stuck on very good. Hope it stays
by: Eric03/12/2018
Great product easy to install. Shipping was also 3 days sooner than expected
Eric
3/12/2019
Been a year and no issues. Holding up great in the Midwest!
by: Mary07/31/2018
Shipping was quick and the product arrived as shown. I ordered the wrong type of Velcro for my cover but was able to use it — didn’t have time for an exchange because of travel plans! Thanks for such good service!
by: Steve11/06/2017
just put in on so i've not had much time using it. It went on great was easy to install, looks like it will really stand up but time will tell. I have tried other product and this one loks and acts better then all the others.
by: Brandon P.06/23/2017
so far so good. alcohol wipes that came with the product were dried up but otherwise the new velcro was easy to install.
by: Alan09/18/2018
Excellant service, right product. Hard to tell which product i needed and the material i got is very cheap. Hook and loop. I bought the hook part. Not very defined and holds but not great.
by: Gary11/02/2018
Was Easy to install and has worked as well as the factory one!
25
50
Show More Reviews
See what our Experts say about this Access Accessories and Parts
- Replacement 1 Inch Wide Access Velcro Strip I went out to our warehouse to take a look at the Access Replacement Adhesive Velcro Strip # A20790 referenced in your question. The velcro strip itself measures 1-1/4 inches wide and not 1 inch. The adhesive strip is wider. For a 1 inch wide Access velcro strip we have the part # A60270, which is 17 feet long.
view full answer...
- Replacement Adhesive Strip for Lund Tonneau CoverThe Replacement Adhesive Velcro Strip # A20790 is 16' long x 1-1/4" wide, and I believe that's what you were referring to by hook portion, and yes it is correct. We do not carry Lund tonneau covers or their replacement parts so while I cannot guarantee that this replacement strip will work, I cannot imagine there being an issue with it as it has the same width as the adhesive velcro strip that you need.
view full answer... - Replacement Adhesive Velcro Strip for Access Tonneau CoversIt sounds like you're looking for the Replacement Adhesive Velcro Strip for Access Tonneau Covers - 16' Long x 1-1/4" Wide # A20790, which has an adhesive backing and is designed for Access tonneau covers; this is 1-1/4" wide and not the 1-1/2" you mentioned but this is the only size I'm seeing available for an Access tonneau and will work just fine.
view full answer... - Replacement Velcro J-Hook Strips for Tonneau CoversI have a solution for you, and the strips that you're referring to are going to come in a couple different sizes, but none of them are going to be 1-1/16" wide. The # TX1117876 strips you're referring to are 1" wide, which have the J-hook style velcro and the closest size to what your existing strips are. The # TX1115174 are 1-5/16" wide and has the J-hook style velcro strips. There is also a velcro style fastener that does not have the J-hooks with part # TX1115173 and is 1-1/4". There...
view full answer... - Replacement 1-1/4" Wide Adhesive Velcro Strip for Tonneau CoverI believe the part that you are looking for is the Replacement Adhesive Velcro Strip for Access Tonneau Covers # A20790 which measures 16' long x 1-1/4" wide. This also comes with alcohol wipes to ensure that you are installing it to a clean surface and rivets to help keep it in place. Attached is a review video for you to reference.
view full answer... - Solution for Needing Replacement Velcro Strip for Tonno Pro TonneauSince the Velcro strip in your Tonno Pro tonneau cover is 1-1/4" wide you could slide it out and use the Replacement Adhesive Velcro Strip for Access Tonneau Covers # A20790. This strip has an adhesive backing to help secure it to the railing of your cover.
view full answer... - Replacement Tonneau Cover Velcro Strips that are 1-1/4 inch Wide We have the part # A20790 which is 1-1/4 inches wide and 16 feet long. This should be the correct width you would need plus more than enough length as well.
view full answer... - Is the Replacement Adhesive Velcro Strip for Access Tonneau Covers Both The Hook and Loop Side?The Replacement Adhesive Velcro Strip for Access Tonneau Covers - 16' Long x 1-1/4" Wide # A20790 is just the hook side of the Velcro. The loop side of the Velcro is attached to the tonneau cover edges.
view full answer... - Replacement Velcro For Access Tonneau Cover On 2012 Ford F-150We have the Velcro you need for your Access Tonneau cover for your 2012 F-150. For the hook portion that installs on the top rail you can use part # A60270 for the 17-ft long and 1-inch wide, and part # A30474 for the 17-ft long strip that is 1-1/2 inch wide. If you need the 1-1/4 inch wide adhesive strip, you can use part # A20790. This is 16-ft long.
view full answer... - What Replacement Velcro Stripping will Work for My Camper Canopy?The best option we have of Velcro strips that comes with adhesive is the Replacement Adhesive Velcro Strip for Access Tonneau Covers - 16' Long x 1-1/4" Wide # A20790 Even though this adhesive stripping is designed for Access tonneau covers, it will technically work with the application of your Jayco canopy stripping. It is important to note that these strips are hook-side only, so your Jayco canopy must have the non-hook Velcro side in order to attach.
view full answer... - Replacement Velcro Strip for Lund Rollup Tonneau Covers The Replacement Velcro Strip for Access Tonneau Covers - 1-1/2" x 17' # A30474 is made for Access tonneau covers, but that it is not to say that it cannot be used on your Lund Rollup L96092. We do not carry any Lund tonneau covers or parts. I do recommend measuring the width of your existing velcro, if it is 1-1/2" wide you would want part # A30474. If it is 1" wide you would want part # A60270; if the velcro is 1-1/4" wide, part # A20790 would be what you need.
view full answer... - How to Pick Out Replacement Velcro for Access TonneauI'm going to need you to measure the width of the Velcro strip of your Access tonneau cover. If the width his 1-1/2 inch you'd need the part # A30474, if it's 1 inch you'd want the part # A60270, or 1-1/4 inch part # A20790.
view full answer...
- Width of Bestop Self Adhesive StripGood news, I was able to go out to the warehouse and measure this self-adhesive strip. The # B41973 measures 1 inch thick. I have attached an image of the Bestop strip for you to see. I was able to find a better solution for you. The Access Replacement Adhesive Velcro Strip # A20790 has dimensions of 1-1/4 inches wide and is 16 feet in length.
view full answer...
- Recommended Replacement Velcro Strips For A Tonno Pro Lo-Roll Tonneau Cover Since the Velcro strip in your Tonno Pro tonneau cover is 1-1/4" wide you could slide it out and use the Replacement Adhesive Velcro Strip for Access Tonneau Covers # A20790. This strip has an adhesive backing to help secure it to the railing of your cover.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Mark S
Written by:
Rachael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John
10/23/2023
So far so good. The product is still working GREAT, and it’s been almost a year. I would buy again if I ever have to…