Replacement Fasteners for 1-5/16 Width Velcro on TruXedo Tonneau Cover

Question

Question:

How do you measure for correct size, the total width of hook and loop or just the hook part of it. My overall width is 1 5/16” and the hook width is a 1” so which one do you go by.

asked by: Jason

0

Expert Reply:

If the width of your existing fastener is 1-5/16 inches the correct replacement for your TruXedo Tonneau Cover is the part # TX1115174. This is designed for 6-1/2 foot beds but if you happen to have a long 8 foot bed you would need part # TX1115173 instead.

expert reply by: Chris R

0

Answer 1

I am happy to help! Starting with the two holes in the shorter hangers included in the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center #APT8 you were looking at. Those holes are not for…

view full answer...

Answer 2

We have 1-1/4 inch wide Velcro strips for Truxedo tonneau covers like the part #TX1115173. These slide in a rail like you said yours does as well. This fastener replaces the hook piece which attaches the tonneau cover to the truck rails. The mating…

view full answer...

Answer 3

I reached out to my contact at TruXedo and from your description and pictures they were able to identify your model as the LO PRO. Also, she knows that the 2005 F250 has a slightly longer bed than most, and as such you will need the the TruXedo…

view full answer...

Answer 4

I spoke with my contact at Truxedo and she informed me that the Replacement Truxedo Shur-Bond Velcro Brand Fastener #TX1115173 that you referenced just comes with the hook side that goes on the bed rails.

view full answer...

Answer 5

The Replacement Truxedo Shur-Bond Velcro Brand Fastener, part #TX1117876 is designed to work with TruxSport tonneau covers only. From the photo you sent it looks like you have a Lo Pro tonneau cover on your truck. The correct replacement Velcro for…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 9

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Replacement Fasteners for 1-5/16 Width Velcro on TruXedo Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching