Replacement Control Box for Thomas Payne Momentum Recliners and Sofas - Qty 1

See what our Experts say about this Thomas Payne Accessories and Parts

• How are RV Recliners With Heat and Massage Functions Powered
  The recliners run off of 110V AC, using a standard 110V outlet. So, if your camper doesn't already have a power inverter you could use one like the Go Power # 34280176. If your loveseat is a Thomas Payne model, you can use the # 195-387595 replacement power cord if yours is missing.
  view full answer...
• Troubleshooting Thomas Payne Recline Power Issue
  Since your Thomas Payne Recliner has no power for any function, I recommend first plugging something into the outlet to make sure that it is properly running and is not the issue. I would then check the cup holder # 195-387597 and the wiring connection because that controls all the functions as a built in wired remote to the control box. Then I would check the connections to the control box # 195-387596. Finally I would check the 12V power cord # 195-387595. There are no external fuses...
  view full answer...
  
• Troubleshooting Thomas Payne Momentum Recliner Not Closing
  It sounds like the issue may be in the control box. There is a way to troubleshoot the control box and that is by switching the control boxes from each recliner to the other. If the recliner that does not close now, closes with the opposite control box and vice versa, you will need to replace that control box. You will need the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas - Qty 1 # 195-387596 to correct the problem.
  view full answer...
• Is There a Fuse in the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas
  The Replacement Control Box for Thomas Payne Momentum Recliners and Sofas part # 195-387596 does not contain a fuse. The small black plug is designed to plug directly in to the existing plug on the sofa or recliner and is a direct replacement for the Momentum series from Thomas Payne
  view full answer...
• Troubleshooting Thomas Payne RV Recliner That Does Not Retract
  It sounds like the control box is faulty on your Thomas Payne recliner, however, you could also try unplugging the chair for 10+ minutes to let the chair reset and also check for any wires that could have been pinched and damaged. If it is still not able to recline then you very likely need a new control box. To find the correct control box you will need to verify if you have a Momentum series or Seismic Series. The manufacturer was not able to tell me exactly where to look for a part...
  view full answer...
• Troubleshooting Thomas Payne Momentum RV Dual Reclining Sofa that Won't Close
  What I recommend doing is swapping the Control Box # 195-387596 from the working side to the side that isn't working to see if that makes a difference. If it does then you'll want to get a replacement using the part above. If it doesn't fix the problem then I'm afraid you'll have to get a new recliner system as the Thomas Payne Momentum series is no longer available and they don't have a great amount of replacement parts left available.
  view full answer...
• Troubleshooting A Thomas Payne Recliner that Won't Retract
  What you can first try, if you have not already, is unplugging and plugging back in the sofa. You'll want to make sure to wait at least 10 minutes before restoring power. It also wouldn't hurt to check the wiring as well, and make sure you're checking for pinched wires or any broken/frayed wires. It is possible that the cupholder has gone bad. Since the cupholders control the functionality on the chairs, you can try and unplug the cupholder and checking to see if it works. If not, you...
  view full answer...
• Troubleshooting Thomas Payne RV Couch Cupholder Buttons Flashing
  Sounds like possibly a loose connection to the cupholder wiring connectors of your Thomas Payne couch or the cupholder wiring is bad and would need to be replaced. For a replacement we have the part # 195-387597 which in the product pictures you can see how it connects to the couch's wiring. Also it could be a control box like the part # 195-387596 for if you have a Momentum. To test if it's a control box what you can do is swap the left side control box with the right side. If the problem...
  view full answer...
• Troubleshooting Functions Not Working on Thomas Payne Momentum RV Dual Reclining Sofa
  There are a few possibilities as to why only one side of your Thomas Payne Momentum RV Dual Reclining Sofa is acting up (or not acting up at all in your case). There are 3 components that allow the recliner to operate the lights, massage, and heater. These are the Cup Holder # 195-387597, Control Box # 195-387596, and the 12V Power Cord # 195-387595. To determine which of these components needs to be replaced simply try using parts from the side that is working. Start off by swapping...
  view full answer...
• Replacement Power Cord For Thomas Payne Recliners And Sofas
  The Replacement 12V Power Cord for Thomas Payne Momentum Recliners And Sofas # 195-387595, will work with the following Thomas Payne Momentum recliner or sofas: -195-000055, 195-000056, 195-000055-056, 195-055-056-058, and 195-055-056-057. If you have the Thomas Payne Seismic Series Recliners, you can use the Replacement Power Cord with Power Supply Box for Thomas Payne Seismic RV Power Reclining Sofas # 195-000111.
  view full answer...
• Help Finding Notch to Remove Thomas Payne Cupholder
  I spoke with my contact at Lippert who said that there is a notch in the side of the cup holder that you should be able to feel with your hand. I attached a picture of where it is as well. Once you find it you will need to use a flathead screwdriver or a butter knife to pop it up. This will reveal 2 screws that you will need to take out before detaching the cup holder wiring from the arm. She also said that when the massage function goes out this is typically something that is related...
  view full answer...
  
• Troubleshooting Thomas Payne Recliner Power Issues Where Nothing Works
  Since your Thomas Payne Recliner has no power for any function, I recommend first plugging something into the outlet to make sure that isn't the issue. Next, I recommend checking the Cup Holder # 195-387597 and it's wiring connection because that selects the functions as a built in wired remote to the control box. Next check the connections to the control box # 195-387596 itself. Finally check the 12V power cord # 195-387595. There are no external fuses or circuit breakers that would...
  view full answer...
• What is Warranty Length of Thomas Payne Recliners with Heat Function
  The warranty on all of the now discontinued Thomas Payne RV Swivel Glider RV Recliner w/ Heated Seats like the 195-000029, is 1 year from the date of purchase. If the chair is OEM in the RV then the warranty is 1 year from the date of the original purchase. To test the heater unplug the red and black wires from the control box (located behind and under your recliner) and test for continuity using a multimeter like part # PTW1714. If you have continuity then that means the control box is...
  view full answer...
• Troubleshooting A Thomas Payne Recliner That Has Lights That Don't Turn Off
  Since you mentioned you've already replaced your cupholder # 195-387597, and your power cord # 195-387595, I suggest you try to reset the chair if not preformed already. You'll want to unplug the unit from power, and let it set for about 10 minutes. Then plug the unit back into power, and check for functionality. If that doesn't fix it, then since you've already replaced your power unit and the cupholder, you'll more than likely need to replace the control box # 195-387596.
  view full answer...
• Solution for Thomas Payne Couch that Heater Switch Does Not Work
  The control box of your couch is not interpreting the switch turning off and on. This is evident as the other functions of your couch are working properly with the cup switch. So you'd need the replacement control box part # 195-387596 and you'd be set.
  view full answer...
• Thomas Payne Theater Seating Automatically Reclines Back
  The issue you are experiencing with your Thomas Payne Theater Seating could be either the control box or cup holder. In order to determine which is the issue you will simply need to swap out one side for the other and see if the problem continues on that side. If you have the momentum series then the part number of the control box is part # 195-387596 and the part number for the cup holder is part # 195-387597.
  view full answer...
• Troubleshooting A Thomas Payne Recliner That Will Not Recline
  For your Thomas Payne dual reclining loveseat, there could be a number of reasons why your recliner will not recline any longer. Lippert, the manufacturer of these recliners, has recommended you first unplug the unit from power, and let it sit for around 10 minutes. Sometimes a simple turn off, turn on fix is all that is needed to fix an issue. Another thing you can do is swap the cup holders, and see if the functions change on the chairs. If the left side works with the other cup holder,...
  view full answer...
• Footrest Will Not Work on the Thomas Payne Momentum Sofa But Massage, Lights, and Heat Do
  It sounds like you have a Thomas Payne Momentum RV Dual Reclining Sofa like part 195-055-056-058. If this is the case then odds are there is an issue with the control box as 90% of problems with the Thomas Payne Momentum RV Dual Reclining Sofa are associated with a faulty control box. If you swap the control box on the side that is working and the footrest then functions you know the control box is bad and will need to be replaced with the Replacement Control Box for Thomas Payne Momentum...
  view full answer...
• Troubleshooting Thomas Payne Momentum Sofa That Wont Recline But Other Functions Work
  It sounds like you have a Thomas Payne Momentum RV Dual Reclining Sofa that one of the control boxes has gone bad on; in our experience, 90% of problems with the Thomas Payne Momentum RV Dual Reclining Sofa are associated with a faulty control box and there is an easy way to test this. If you swap the control box on the side that is working with the one on the side where the footrest and reclining function doesn't work and it then functions- you know the control box is bad. You can replace...
  view full answer...
• Replacement Cupholder And Controller For Thomas Payne Momentum Recliner
  Your best bet will be to get the Replacement Cup Holder for Thomas Payne Momentum Recliners # 195-387597, since the plastic cover is not available separately. This will be a direct replacement for the cupholder with the heat, massage and LED buttons. Since the heat does not function, this is likely due to a bad controller. For a replacement controller you will need the Replacement Control Box # 195-387596, which will be a direct replacement for your momentum recliner.
  view full answer...
• How To Tell If I Need To Replace The Cup Holder Or Control Box On A Thomas Payne Momentum Recliner
  From what you are describing, you have a short in one of two places. First is the cup holder # 195-387597 that has the controls for these functions and would explain the odd things it is now doing. However, it could also be the control box # 195-387596. The best way to find the culprit is to remove the cup holder from the side that is working properly and plug it into the side that is misbehaving. If this fixes everything, you will need to replace your cup holder with the # 195-387597....
  view full answer...
• Do the Thomas Payne Momentum Recliners Have USB Ports
  No, the recliners that use the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas # 195-387596 do not have USB ports.
  view full answer...
• Thomas Payne Momentum Theatre Seating Stuck in Recline
  I wish there was a manual latch or release for the foot rest of the momentum seating. It's not an ideal solution but you could try swapping the good motor from the other side of the chair to the bad side to lower it for the time being. Most of the time it's the control box so if the motor swap does not work you can try that too. For a replacement control box you'd want the # 195-387596.
  view full answer...
• Thomas Payne Recliner Has Power But Does Not Work
  This sounds like a faulty control box, and unfortunately that is a pretty common issue with these recliners. To fix it, you'll just have to replace your control box with the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas # 195-387596 if you have the Momentum series recliner, or the Replacement Power Control Box for Thomas Payne Seismic Recliners and Sofas # LC36FR if you have the Seismic series recliner. It also wouldn't hurt to do a hard reset before you replace...
  view full answer...

Do you have a question about this Accessories and Part?