How are RV Recliners With Heat and Massage Functions Powered

Question

Question:

Hey I recently bought a camper and the previous owners installed a newer recliner loveseat that has the massage, heat, etc. they never hooked up the power and now I am trying to figure out what power source I need to power the recliner. I have a few pics of the connector end and each recliner has this connector. Once you respond I can attach pictures for reference! Thanks.

asked by: Wesley W

0

Expert Reply:

The recliners run off of 110V AC, using a standard 110V outlet. So, if your camper doesn't already have a power inverter you could use one like the Go Power # 34280176.

If your loveseat is a Thomas Payne model, you can use the # 195-387595 replacement power cord if yours is missing.

expert reply by: Mike L

0

Answer 1

I spoke with my contact at Lippert who said that either the heater is bad or the control box needs to be replaced on your Thomas Payne Momentum recliner. To test the heater unplug the red and black wires from the control box (located behind and…

view full answer...

Answer 2

Since your Thomas Payne Recliner has no power for any function, I recommend first plugging something into the outlet to make sure that isn't the issue. Next, I recommend checking the Cup Holder #195-387597 and it's wiring connection…

view full answer...

Answer 3

It definitely is the circuit board of your MaxxAir roof vent and the correct replacement is the part #MA10A04751KS.

view full answer...

Answer 4

The Replacement Control Box for Thomas Payne Momentum Recliners and Sofas part #195-387596 does not contain a fuse. The small black plug is designed to plug directly in to the existing plug on the sofa or recliner and is a direct replacement for the…

view full answer...

Answer 5

The Cup Holder for Thomas Payne Momentum Recliners and Sofas - Qty 1 Item #195-387597 were designed to be extra sensitive so that you can easily use them by just gliding your finger over them and there unfortunately is no way to turn the sensitivity…

view full answer...

Answer 6

The Replacement 12V Power Cord for Thomas Payne Momentum Recliners And Sofas #195-387595, will work with the following Thomas Payne Momentum recliner or sofas: -195-000055, 195-000056, 195-000055-056, 195-055-056-058, and 195-055-056-057. If you have…

view full answer...

Answer 7

The warranty on all of the now discontinued Thomas Payne RV Swivel Glider RV Recliner w/ Heated Seats like the 195-000029, is 1 year from the date of purchase. If the chair is OEM in the RV then the warranty is 1 year from the date of the original…

view full answer...

Answer 8

It sounds like you've got a Thomas Payne Seismic Dual Power Reclining RV Loveseat w Console, Heat, Massage, LEDs like the #195-091-092-090, and you need the power plug for it. In this case you'll want to use the Replacement Power Cord with…

view full answer...

Answer 9

Try removing the good working cupholder and installing it on the side that isn't working. Most likely that will fix the issue and indicates that you need a new cupholder like with the part #195-387597 that you referenced.

view full answer...

Answer 10

I've spoken with Thomas Payne about your dual theater seating #195-000091. You need to check all the connections and if the problem is still happening, then you will need to replace the control box. Usually that will fix it.

view full answer...

Answer 11

You could test the wiring of the heating pad with a circuit tester like the part #PTW2993 to see if there is voltage to it when the heating function is on. If you are getting voltage but the seat isn't heating you'd want to replace the heater…

view full answer...

Answer 12

I spoke with my contact at Lippert who said that there is a notch in the side of the cup holder that you should be able to feel with your hand. Once you find it you will need to use a flathead screwdriver or a butter knife to pop it up. This will…

view full answer...