Replacement Winch Handle for Fulton Winches - 10" Long
(14 reviews)
Price: $45.63
In Stock
Replacement Winch Handle for Fulton Winches - 10" Long
Item # F501110
Retail:$128.61
Our Price: $45.63
You Save: 65%
In Stock
- All Info
- Reviews (14)
- Q & A (0)
- Videos (1)
- Photos
Fulton Accessories and Parts - F501110
- Trailer Winch
- Handles
- Fulton
- 10 Inch Long
Replaces the handle on your Fulton winch (F142002, F142003, F142007, F142101, F142104, F142204, F142301, F142306, F142430). Handle measures 10" long.
Features:
- Replaces the handle on your Fulton winch (F142002, F142003, F142007, F142101, F142104, F142204, F142301, F142306, or F142430)
Specs:
- Handle length: 10"
- Quantity: 1 replacement handle
Fits:
- Fulton winches: F142002, F142003, F142007, F142101, F142104, F142204, F142301, F142306, and F142430
501110 Replacement 10" Long Winch Handle for Fulton Winches
Replaces 9235P01
California residents: click here
Video of Replacement Winch Handle for Fulton Winches - 10" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Fulton Trailer Winch F501110 Review
Speaker 1: Today we're taking a look at the Replacement 10"-long Winch Handle for Fulton Single-Speed Winches. Now this works on a lot of different models, so at the end of this video I will list all of the models that this handle will work for as a replacement.Now when we talk about the handle length, we're talking about the measurement from center of where it mounts out to the center of the handle. That's 10". The radius would be from the center of where it mounts to the outer edge of the handle, or this grip area, which is 10-1/2" for this particular replacement handle. The grip area, which is this area right here, that black plastic piece measures about 3-1/2" to 3-9/16" long.This handle is very easy to install and to remove from the winch. To install it, all you have to do is depress right here, place it on, and then release for it to engage.
And then when you're ready to remove it you depress again, pull this off or away from the winch, and that's all there is to it. So it's a nice easy to use design. It's made from durable steel, and features protective finishing to keep it safe from rust and corrosion.That's going to do it for today's look at the Replacement 10"-long Winch Handle for Fulton Single-Speed Winches. And this does work on models F142002, F142003, F142007, F142101, F142104, F142204, F142301, and F142306.
Customer Reviews
Replacement Winch Handle for Fulton Winches - 10" Long - F501110
Average Customer Rating: 5.0 out of 5 stars (14 Customer Reviews)
Replaces the handle on your Fulton winch (F142002, F142003, F142007, F142101, F142104, F142204, F142301, F142306, F142430). Handle measures 10" long.by: Mark 09/18/2023
fit perfectly
by: Tim08/13/2021
Professional experience with the salesperson at etrailer. Very knowledgeable and offered a credit back if it didn't fit properly. Tracking system was excellent and arrived on time. Trailer winch handle fit like a glove.
No hesitation ordering from them again!
by: Russell 10/23/2019
Product arrived in a timely manner and was the handle I needed as per the Picture.
Thanks for the service
by: Monte 11/05/2020
just what i needed. as usual prompt delivery,no b.s.
by: Fausto07/20/2019
The product fit and worked perfectly, but was more impressive was the help, support and follow through by Cailee!! Thank you!
by: Verle06/06/2021
fits like it should very happy
by: Victor 02/15/2020
Good service, Excellent product Thanks.
by: Mike 09/15/2021
Awesome service!
by: Peggy 09/24/2020
Great service and speedy delivery!
by: Danny 04/11/2023
by: Mike 10/01/2022
by: Robert 09/12/2021
by: Skip 03/04/2023
by: Alvaro 08/18/2020
14
14
See what our Experts say about this Fulton Accessories and Parts
- Replacement Hand Winch Handle For The Fulton XLT1801I called our representative at Fulton and they informed me that the correct replacement winch handle for the Fulton XLT1801 winch is the Replacement 10" Handle for Fulton Hand Winch which are no longer available, but we have the 11" version # F501110 that is also confirmed to work. The handle is 11" long with a slight offset, the mounting nut is also included.
view full answer... - Possible Replacement Handle for Shelby Winch with 1/2 inch Diameter Handle HoleThe diameter of the handle hole part # F501110 is 1/2 inch like it looks like you'd need based on your picture and similar requests from other customers so this would most likely work although it's never been tested.
view full answer...
- Replacement Handle For Fulton Winch Model 596A or 597AIf you have a Fulton winch that is model 596A or 597A there is a replacement handle; you need the Replacement 10" Long Winch Handle for Fulton Single-Speed Winches # F501110. I have added a link to a video review of this winch for you to check out.
view full answer...
- Recommended Replacements For A 3,200 Pound 2 Speed Fulton WinchFrom what I could tell, it looks like you have the Fulton 2-Speed Trailer Winch # F142424 currently installed on your trailer. With that said, the Replacement Handle # F501110 and Replacement Input Shaft Kit # F501134 will definitely be good replacements for you. The Fulton replacement handles will be the exact same ones that come with their winches from the get-go, so they will be the same quality steel as the original. Though welding will obviously be a stronger bond, you may try using...
view full answer...
- Replacement Handle for Fulton T2605 Hand WinchThe Replacement Handle # F501110 referenced in your question is the correct handle for your Fulton T2605 Hand Winch. I spoke with my contact at Fulton and he stated that their handles do not feature a specific weight rating. They are designed to match the weight capacity of any winch they would be used on, so you do not need to worry about one being under-rated. This particular handle is 11 inches long. We do have a 9 inch Replacement Handle that you can use instead with part # F501109,...
view full answer... - Does Fulton Winch Handle F501110 Replace Handle 6817P01Replacement Handle for Fulton Hand Winch # F501110 can be used as a replacement for the old 6817P01 handle. In fact, this is the official replacement for the old version, but is 1 inch longer.
view full answer... - Replacement Handle for Shelby 5404 WinchThe handles for the Dutton-Lainson Single Speed Winches feature a mounting hole size that is a bit larger than what is on the handle for your existing Shelby Model 5404 Winch. We do have the Replacement Handle for Fulton Hand Winch # F501110 that features the same measurements you took on your mounting hole. The hole on this handle measures 3/8 inch to the square sides and 1/2 inch to the rounded sides. Keep in mind though that this handle has not been tested with your Shelby winch so...
view full answer... - Fulton Winch Handle Replacement for Fulton 596Yes the winch handle part # F501110 does fit your Fulton 596 winch so it would be what you'd need.
view full answer... - Replacement Handle For Fulton Winch T2625The correct replacement handle for your Fulton T2625 winch was 10" and is no longer available. The 11" # F501110 or the 9" # F501109 you were looking at would work just fine as well. I included videos of the products mentioned for you to take a look at.
view full answer... - Replacement Winch Handle Recommendation for Fulton Winch T1801-0301The proper replacement for your Fulton T1801 winch would be the Fulton Replacement Winch Handle, part # F501110. To make absolutely sure we got you the correct replacement handle, I have confirmed this with my Fulton representative. The original handle was 10", this one is 11" and will work fine.
view full answer... - Replacement Trailer Boat Winch Handle for Shelby 5409 WinchI was not able to find any exact information on your Shelby 5409 winch handle. I did see according to some old brochures that it uses a 10" handle where the Shelby 5404 only has an 8" handle. I wasn't able to see what size shaft the crank handle fits to. The Replacement Handle # F501109 is 9" long and features the common 3/8" flat and 1/2" oval shaft connection. If your Shelby 5409 has the same shaft then this handle will work for your winch. This is also available in an 11" version # F501110.
view full answer... - Determining A Replacement Winch Handle For A 2021 Shorelander Boat TrailerWe do have a variety of replacement winch handles like the Replacement Handle for Fulton Hand Winch # F501110 for the Fulton 2-Speed Trailer Winch, however in order to determine the correct replacement handle, I would need to know the make and model of your winch. From here we can see if we have any replacement handles for you, also, I have attached a link to all of our replacement handles for you to check out as well.
view full answer... - Replacement Handle for Fulton T1602 WinchThe replacement handle you need for your Fulton T1602 winch is not available in the original 10" length. We do, however, have it in the 11" version # F501110, or the 9" version # F501109.
view full answer... - Available Replacement Winch Handle for Fulton T1801 Hand WinchThe hole in the handle is slotted, and is meant to replace the handle on a Dutton-Lainson DL1400 or DL1402 winch. The proper replacement for your Fulton T1801 winch would be the Fulton Replacement Winch Handle, part # F501109 or # F501110 depending on the length that you prefer. To make absolutely sure we got you the correct replacement handle, I have confirmed this with my Fulton representative.
view full answer... - Replacement Winch for 3,500 lb Boat Trailer Winch handles are designed to fit specific manufacturer models of winch, so you can potentially get a replacement handle, but for the correct one you will need to know the model number and manufacturer; if you do know that information, you can let me know and I would be happy to try and find the correct replacement for you. Apart from that you would need a new winch. I recommend checking out Boat Trailer Winch # 315-W2500D, which has a 2-speed system, self-locking crank and comes with...
view full answer...
- Replacement Handle for Fulton T3205 2-Speed Trailer WinchThe Replacement Handle for Fulton Hand Winch - 11" Long # F501110 is compatible with the Fulton T3205 trailer winch.
view full answer... - Replacement Handle for Fulton Winch Model T1602Yes, the Fulton Replacement Winch Handle # F501110 will fit all single-speed and two-speed Fulton hand winch models that require a handle with an oval opening of 3/8 x 1/2-inch.
view full answer... - Replacement Handle for Fulton T2625 WinchYes, you do have the correct replacement handle for your Fulton T2625 winch, the Replacement Handle for Fulton Hand Winch # F501110. This 11" handle will fit your T2625 winch and work perfectly.
view full answer... - Fulton T1801 Trailer Winch Handle ReplacementThe Replacement Handle for Fulton Hand Winch - 9" Long # F501109 is the replacement you are seeking. It will have the oblong hole to allow the cranking of the winch without slipping.
view full answer... - What Winches Does Replacement Handle FitNo as the # F501110 fits Fulton winches F142002, F142003, F142007, F142101, F142104, F142204, F142301, F142306, and F142430.
view full answer... - Thickness of Replacement Fulton Winch HandleThe 11-inch-long Replacement Handle for Fulton Hand Winch # F501110 measures approximately 1/4 inch thick. I have added a link below to a video review for you to check out of the Replacement Handle # F501110.
view full answer... - Replacement Handle for Fulton Hand Winch T1401To replace the winch handle on your Fulton T1401 hand winch, you will want to use the Replacement Handle for Fulton Hand Winch part # F501110. This is 1 inch longer than your original handle.
view full answer... - Replacement Handle For Fulton Two Speed Winch T-3700 Without Threads On ShaftYou need replacement 10" winch handle part # F501110 for your Fulton two speed T-3700. This handle uses a special clip to attach.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Cole B
Written by:
Wilson B
Updated by:
Alexander C
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.