Replacement Handle for Shelby 5404 Winch
Question:
I need to replace a winch handle on my Shelby Model 5404. Would the Dutton-Lanson 7 Single Speed handle fit. The hole size of the arm where it engages the winch is what I need. Mine is 3/8 to the square sides and 1/2 to the rounded sides.
asked by: Brian R
Expert Reply:
The handles for the Dutton-Lainson Single Speed Winches feature a mounting hole size that is a bit larger than what is on the handle for your existing Shelby Model 5404 Winch.
We do have the Replacement Handle for Fulton Hand Winch # F501110 that features the same measurements you took on your mounting hole. The hole on this handle measures 3/8 inch to the square sides and 1/2 inch to the rounded sides. Keep in mind though that this handle has not been tested with your Shelby winch so I cannot guarantee that it will fit and work well.
Since Shelby is no longer in business, you might also consider replacing your winch altogether since replacement parts will be hard to come by.
For a replacement winch I recommend taking a look at the Dutton-Lainson Hand Winch # DL14996. This has a similar design to your existing Shelby unit and it features a 1,500 pound capacity. I have attached a short video demonstration that you can check out as well.
Products Referenced in This Question
Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - Freewheel - 1,500 lbs
- Trailer Winch
- Brake Hand Winch
- Utility Winch
- Standard Duty
- Standard Hand Crank
- Single Speed Winch
- Wire Rope
- Polyester Strap
- Dutton-Lainson
more information >
Replacement Winch Handle for Fulton Winches - 10" Long
- Accessories and Parts
- Trailer Winch
- Handles
- 10 Inch Long
- Fulton
more information >
Product Page this Question was Asked From
Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,400 lbs
- Trailer Winch
- Standard Hand Winch
- Boat Trailer Winch
- Utility Winch
- Standard Duty
- Standard Hand Crank
- Single Speed Winch
- Wire Rope
- Polyester Strap
- Dutton-Lainson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement 11" Long Winch Handle for Fulton Single-Speed Winches
- Shop: Replacement Winch Handle for Dutton Lainson Winch - 6"
- Shop: Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - Freewheel - 1,500 lbs
- Shop: Replacement Handle for Fulton Hand Winch - 9" Long
- Shop: 9-1/2" Long Winch Replacement Handle by Dutton-Lainson
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 3,500 lbs
- Shop: 9-1/2" Long Winch Quick Attach Replacement Handle by Dutton-Lainson
- Video: Dutton-Lainson Trailer Winch DL70326 Review
- Q&A: Winch Handle Shaft Dimension for Dutton Lainson Replacement Handles
- Q&A: Determining If 9 Fulton Winch Handle Will Fit On Fulton 143001 Winch
- Q&A: Can a Trailer Jack Attach to a Trailer with Round Tongue
- Q&A: Recommended Swivel Jack for Round Tube Trailer Tongue
- Video: Review of Jif Marine Trailer Winch - 2-Speed 3,200 lb Boat Trailer Winch - 315-W3200D
- Video: Fulton Trailer Winch F501110 Review
- Search Results: jif marine
- Q&A: Possible Replacement Handle for Shelby Winch with 1/2 inch Diameter Handle Hole
- Article: Hand Winches
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE31005PG Review
- Search Results: hopkins 7 pin connector
- Search Results: adapter plug
- Video: Review of Dutton-Lainson Trailer Jack - Boat Trailer Jack - Side Frame Mount Jack - DL97MR
- Q&A: Winch to Replace Shelby Model 5352
- Q&A: Replacement for Shelby Boat Winch
- Shop: Replacement Mirrors
- Shop: Tailgate
- Shop: Vehicle Lights
- Video: CIPA Replacement Mirrors - Replacement Standard Mirror - CM46310 Review
- Search Results: winch handle
- Search Results: replacement winch handle
- Search Results: trailer jack
on Trailer Winch
Kathy S.
7/9/2020
Any replacement part for the Shelby 5409B handle?