Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that are ready to ship
Convenient, locking wheel wedge is designed for use with Fulton's swing-up, wide-track trailer jacks.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Shane: Hey guys, Shane here with etrailer.com. Today, we're going to be taking a look at the Fulton Wheel Wedge for a Fulton F2 swing-up jack.What this is designed to do is it's going to fit in place on your wheel and it's going to allow you to lock your wheel in place. This is going to eliminate the need for getting something to set your wheel on to keep your tongue from rolling around. If you're on concrete, here you see we're on an angle a little bit, if we we're to set this down, we may take a chance of the front end swinging a little bit. Being able to lock that front wheel, that jack wheel, is going to keep that tongue from moving around on us.It's going to come with the mounting hardware, very easy to install. It's going to have a very durable rubber outer coating and a solid inner core.
You can see there's very little give. And if I try to twist this, if you think about it holding our wheel in place, and you see, I can't get it to bend. So it's going to hold up really well.Keep in mind, this is designed for the single wide wheel F2 jack. Simply slide it into place like that. You're going to take your bolt, slide it through like this.
Put on your lock nut, tighten it into place, and when you're wanting to lock your wheel, you simply step on that like that and it locks that wheel in tight. Again, keeping the front of your trailer from moving around on you.With it now locked in place, we're able to move our tongue around pretty easy, wheel's not going to move. So it helps our trailer stay in place. Again, you don't have to worry about it swinging out of the way if we're on unlevel ground.As I mentioned before, this is going to be for the single wide wheel Fulton F2 jack. If you get the full Fulton F2 jack that has a double wheel, there is a blocking pad for that also.
You just want to make sure you get the correct one. You can find those here etrailer.com. That's going to do it for a look at the Fulton Wheel Wedge Kit.
Average Customer Rating: 4.8 out of 5 stars (16 Customer Reviews)
Convenient, locking wheel wedge is designed for use with Fulton's swing-up, wide-track trailer jacks.Adjustable set up sold me. My driveway has a down slope. My truck is partially in street which has a slope which puts ball mount much lower then run height. I couldn’t swing old Jack up. This adjustable sliding mount is amazing. Heavy duty. Overkill for my boat well worth it. Mine was missing the wheel lock so I called E Trailer and they are sending me one.
The product is heavy duty and the large wheel makes it easy to move my boat around my barn. T he wheel lock was missing but I called etrailer and they are sending a replacement.
The jack arrived in excellent shape and was easy to bolt on. I wanted this assembly because I needed a jack that could be adjusted for a different height. Was easy to set the height needed and looking at the picture, it appears that it came from the factory installed on the trailer. My only regret is that I wish it was a four inch wheel like I had on my previous jack. Enjoyed the customer service note on the box flap and passed it along to my son who is in marketing.
Better than no brake but it snaps into braking position without being placed in brake position. This is expensive for a bolt, nut and molded rubber piece. I use it to keep the trailer from inadvertently being rolled when it is detached from vehicle. I still use wheel chocks as well.
Really great addition to trailer! Good quality and of course excellent customer service.
This is a really good quality jack, very sturdy even extended under load from the tongue weight of a 21' Jet boat. I bought it to replace a jack that I feared would end up failing and crushing my foot when moving around on the concrete floor. This jack will not allow that. The customer service at Etrailer was just as good, in fact I called to ask some questions about a wheel lock and ordered over the phone after viewing online.
Read on the Bass Boat Central forum that this was the jack to get for the new boat and trailer I'm buying. Wow, were they right. This thing is solidly built with a large diameter and width wheel. It is exactly as advertised and came within a couple days of ordering it. Etrailer actually shipped it the night I ordered it! Awesome product and great service. I will shop here again for all my trailer needs.
As advertised and works perfect. Shipped the night I ordered it and arrived with the trailer jack. I highly recommend this brake with the Fulton trailer jack. Great product and great service. In the future I will do all of my trailer shopping on etrailer.
They exceeded my expectations!
The foot brake is just what the doctor ordered. It fits well and will do the job that I need. Thank you for the fast service and parts.
George in Kirkland WA.
very reliable company they will have my buisness
Great product and service!! Highly rec ommend!!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
N84boating
6/9/2020
Not worth the price. Will not stay in unlocked position.