Replacement Brake Spring Set for Dexter 10" x 1-1/2" Electric Trailer Brake Assembly

See what our Experts say about this Dexter Accessories and Parts

• Replacement Parts for Dexter Brakes 10 Inch by 1-1/2 Inch
  For your Dexter axle, you will want the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,000 lbs # K23-472-473-00. These assemblies are 10" diameter x 1-1/2" wide. If you just want the individual components: # BP04-065 for brake shoes # K71-362-00 for brake spring set # BP01-110 for brake magnet
  view full answer...
  
• Availability of Replacement Brake Shoes for Dexter Brake Assemblies 8-283
  The Dexter 8-283 is an obsolete 2800lb 10 x 1-1/2 inch hub which the replacement shoes/linings part # BP04-065 that you mentioned are a correct fit for. For just the springs you'd want the part # K71-362-00.
  view full answer...
• Replacement Brake Shoes and Magnets for 2800-lbs Welded On Dexter Hubs
  To replace the shoes and magnets on your welded on hubs you can use the # BP04-065 you were looking at since you've got 10-1/4" brakes. For the magnets, you'll want to use the Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies - 3,500 lbs # AKBRKR-M10. If you also need to replace the springs, you can use the Replacement Brake Spring Set for Dexter 10" x 1-1/2" Electric Trailer Brake Assembly # K71-362-00. There is also a brake adjuster available for these brakes with the Brake...
  view full answer...
• Solution for Needing New Brake Springs, Pads, and Magnets for Dexter 2,000 lb Axles
  Since we don't carry the spring kit you need and you are wanting to replace the magnets and brake pads as well your best option would be to go with the new brake assembly set part # 23-47-48.
  view full answer...
• Replacement Brake Shoes for Brakes Used With Dexter 8-283 Hub and Drum Assembly
  The correct replacement brakes for brake shoes that fit your 8-283 hub and drum assembly are the # bp04-065. We also have the # K71-362-00 if you need replacement springs as well.
  view full answer...
• Replacement Shoe, Springs and Magnets for Electric Brakes on 1996 Camper with 2.8K Axles
  I do have a solution for you, however we do not currently have a complete kit that includes everything you will need to replace the brake parts on your 1996 camper. For replacement electric brake shoe/lining, I recommend the Dexter # BP04-065. This 10 inch x 1-1/2 inch shoe pad will fit the brakes on your 2.8K axle. Then for a replacement brake spring set, you can use # K71-362-00, which are designed to replace the springs on Dexter 10 inch x 1-1/2 inch brake assemblies. For the brake...
  view full answer...
• Recommended Replacement Brake Shoes For Dexter 8-283 Drums
  I believe you have Dexter 8-283 drums which would mean that the 10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel) # bp04-065 you were already looking at are the correct fit for your 1995 Jayco Eagle 230SL's brakes. I also recommend swapping out your springs with the Replacement Brake Spring Set for Dexter 10" x 1-1/2" Electric Trailer Brake Assembly # K71-362-00 since they're most likely rusted or worn out as well.
  view full answer...
• Replacement Retractor Spring for 10 x 2-1/4 Braking Assemblies
  If you are going to try and find specific replacement parts for a set of electric trailer brakes then you need to know what brand you have and around the time they were made. If you do not have this then you have two options, trial and error or replace the entire assemblies. I took a look through all of our replacement parts for braking assemblies and the Replacement Brake Spring Set part # K71-362-00 appears to be what you are looking for. If you want to give this a try then you can but...
  view full answer...
  
• Replacement Brake Assembly Parts for 2800 lbs Philips/Dexter Axle with 1-1/4 Inch Deep Hubs
  You will want the Replacement Brake Spring Set for Dexter 10" x 1-1/2" Electric Trailer Brake Assembly # K71-362-00. Then you will want the Replacement Trailer Brake Magnet Kit for 7" Brake Assemblies # BP01-068 due to the thinner hubs instead of the traditional 10 x 2-1/4 inch hubs. That guide for the anchor post is not available as a replacement part from any of our manufacturers. Your only other option is to replace the assemblies with the Dexter Electric Trailer Brake Kit - 10"...
  view full answer...
  
• Trailer Brake Spring Kit For 10 x 1-1/2" Brake Shoes
  If your brake shoes# bp04-065 are 10" x 1-1/2" you will need these brake springs # K71-362-00. The springs you were looking at # BP06-120 were for 2-1/4" shoe width.
  view full answer...
• Replacement Brake Lining/Shoes for 1996 Coachman Catalina with Dexter 8-283 Hub
  The Dexter 8-283 is an obsolete 2800lb 10 x 1-1/2 inch hub like you measured which the replacement shoes/linings part # BP04-065 that you mentioned are a correct fit for. For just the springs you'd want the part # K71-362-00. It's recommended to replace shoes on both sides of an at least but doing all 4 would be ideal.
  view full answer...
• Replacement Brake Shoe for 10 x 1-1/2 Inch Drum Assembly
  It sounds like you want the replacement brake shoes for drum brakes and based on your description the 10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel) # bp04-065 will work. I recommend also replacing the springs # K71-362-00 at the same time.
  view full answer...
• Replacement 10 Inch x 1-1/2 Inch Trailer Brakes For 1998 Nash 20N With Welded On Brake Backing Plate
  Based on the images with the measurements you sent the Brake Shoe/Lining # bp04-065, Brake Spring Set # K71-362-00, and Magnet Kit # AKBRKR-M10 are the correct replacement parts for the brakes on your 1998 Nash 20N. We do have the Brake Mounting Flange # 4-35 which you can have welded to your axle. This will allow you to replace the Brake Assemblies # K23-472-473-00 which is typically easier and will help you if your brakes become damaged on the side of the road. Then you will be able...
  view full answer...
  

Do you have a question about this Accessories and Part?