Shoe Return Spring for 10" and 12" Brake Assemblies
(11 reviews)
Price: $11.02
In Stock
Shoe Return Spring for 10" and 12" Brake Assemblies
Item # BP07-105
Our Price: $11.02
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (11)
- Q & A (0)
- Videos (1)
- Photos
Redline Accessories and Parts - BP07-105
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Springs
- Return Springs
- Redline
- 10 Inch
- 12 Inch
Shoe Return Spring for 10" x 2-1/4" and 12" x 2" Trailer Brake Assemblies
- Fits 10" x 2-1/4" Dexter electric and single servo hydraulic brake assemblies and 12" x 2" electric brake assemblies
- Fits 10" x 2-1/4" Demco/Dico single servo hydraulic brake assemblies
- Works on both left and right hand assemblies
BP07-105 Shoe Return Spring for 10" and 12" Brake Assemblies
Video of Shoe Return Spring for 10" and 12" Brake Assemblies
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Trailer Brakes BP07-105 Review
Today, we're going to be taking a look at the Shoe Return Spring for 10" and 12" brake assemblies. This kit comes with two springs. Now, return springs simply allow the brake shoe self-adjusters to work correctly. They have a nice, protective coating on them to keep them safe from rust and corrosion. They're going to fit 10" by 2-1/4" Dexter electric and single servo hydraulic brake assemblies, and 12" by 2" electric brake assemblies. It's also going to fit 10" by 2-1/4" Demco single servo hydraulic brake assemblies.
It's going to work on both the left and right hand assemblies. A few measurements to go over with you real quick, just measuring the coiled portion right there. It's going to measure about 2", and then overall length from edge to edge, it's going to give us a measurement, about 4-3/4". That's going to do it for today's look at the Shoe Return Springs.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Shoe Return Spring for 10" and 12" Brake Assemblies - BP07-105
Average Customer Rating: 4.7 out of 5 stars (11 Customer Reviews)
by: Dirk02/02/2020
All parts arrived quickly and fit perfect! I bought a used car trailer few months ago and brakes quit working. Pulled drums and needed new magnets, it was missing spring on one side, prior owner must have got some bad service. E-Trialer hooked me up with all the parts, also ordered hub seals and grease and repacked bearings. Thank you !!!
by: Don H. 08/03/2016
They had everything I needed prices were great as well. I will be shopping there again when I need something for my trailer.
by: Richard09/14/2017
On time. Always been great on delivery. But I ordered wrong part. My fault still can use them for future reosirs
by: fred b08/10/2015
fit perfect,all of order was shipped quick, worked well
by: David 08/03/2020
we bought these to go with the new shoes , the old ones looked rather tired , everything works great now
by: Greg V03/28/2018
I was able to see all the parts I was ordering and the specs of some of the parts made it easy to get the wright parts also customer service followed every order.Thanks Greg
by: David Mac02/02/2021
They worked, good quality, no complaints
by: Thomas06/14/2018
These fit great and arrived quickly
by: Seldon10/17/2020
No complaints, the springs fit and all looks good.
by: Thomas 01/01/2024
by: Terry03/04/2022
11
11
See what our Experts say about this Redline Accessories and Parts
- Replacement Hydraulic Trailer Brake Return Spring Free Backing 10 Inch BrakesWe have the Shoe Return Spring for 10" and 12" Brake Assemblies # BP07-105. I've attached a photo of the spring to assist. We don't have any other options for that primary shoe for the 10 inch hydraulic assemblies.
view full answer...
- Titan Hydraulic Brake Replacement Springs and Wheel CylindersFor the complete brake assemblies, you would want the Titan Hydraulic Brake Kit - Uni-Servo - 12" - Left and Right Hand Assemblies - 6,000 lbs # T2351100-000. For the wheel cylinder replacements you will want the right hand # AKBRKR-H7-R and left hand # AKBRKR-H7-L. For the springs, I recommend: Replacement Front Lever Spring for Titan Free Backing Drum Brakes # T4465600 Adjuster Spring - Dexter 12" Hydraulic Trailer Brake Assemblies # BP08-120 Shoe Hold Down Spring for BP04-185 # BP06-090 Shoe...
view full answer... - Replacement Parts Needed for the Titan Hydraulic Brake Kit # T1878800-700We do carry the following parts for the Titan Hydraulic Brake Kit # T1878800-700 that you referenced: Uni-Servo Wheel Cylinder RH - # T0977600 Uni-Servo Wheel Cylinder LH - # T0977700 Adjuster Spring - # 046-083-01 Shoe Return Spring - # BP07-105 As well as the mounting bolt # 7-75, lock washer # 5-8, and nut # 6-17 for the assemblies. If there are any other pieces that need to be replaced then it would be easier just to replace the brake assemblies as a whole. a lot of times this is...
view full answer... - Recommended Shoe Return Spring for 12" x 2" Hydraulic Drum BrakesThanks for the information! It sounds like you're looking for the # BP07-175 which measures in at 5-3/8" which should be perfect for your 12" x 2" Hydraulic brakes. Since your old string probably stretched a little bit, this will be a perfect fit.
view full answer... - Replacement Spring Parts for 10" Hydraulic HD-1377-10 Brake AssembliesTo replace the springs on your 10" hydraulic drum brakes you'll need the following: - Shoe Return Spring Kit # BP07-105 - Replacement Adjuster Spring # 046-083-01 - Shoe Hold Down Spring Kit # BP06-120
view full answer... - Replacement Parts for Dexter Nev-R-Adjust 12 x 2 Inch Electric Trailer BrakesThose are 12 x 2 Dexter brake assemblies, 5200 capacity, with 5 bolt mounting flange. But the Nev-R-Adjust brakes on these axles should be the 12 x 2 inch brakes. We have several parts available including the following: Actuating Arm, Left Hand, # BP02-230 Actuating Arm, Right Hand, # BP02-240 Shoe Hold Down Spring, # BP06-090 Shoe Return Spring, # BP07-105 (works on left or right hand sides) Adjuster Plugs, # BP10-220 Adjuster # BP10-060 (these are regular adjusters so you may need to...
view full answer... - Recommended Brake Replacements For 2000 Jayco Eagle 12SOWhen replacing brakes on a trailer it is often more cost effective to get the entire assembly than to get the parts piece by piece. I recommend the Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKUBRK-35 for your 2000 Jayco Eagle 12SO. However, if you just want the brake cylinder, I recommend the Replacement Wheel Cylinder for 10" and 12" Hydraulic Brakes - Uni-Servo - Right Hand # AKBRKR-H7-R and left hand # AKBRKR-H7-L. For the shoes,...
view full answer... - How Many Springs Are Included In Redline Shoe Return Spring PackageI pulled the Shoe Return Spring, part # BP07-105 from our warehouse. There are 2 springs in the package, and will fit 10 x 2-1/4 Dexter electric and servo hydraulic brake assemblies and 12 x 2 electric brake assemblies. This also fits 10 x 2-1/4 Demco/Dico single servo hydraulic brake assemblies, and works on both left and right hand assemblies.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Cole B
Expert Research:
Jeffrey L
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Freddie B.
8/9/2016
great,no problems