Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fits Curt Friction Style Sway Control System (17200)
45822 Curt Weld-On Sway Control Tab
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Curt Weld-On Sway Control Tab. This tab is designed for adding a mounting plate for your sway control ball. It's going to be made from a steel construction, featuring a nice black powder coating finish on it to help it resist rust and corrosion. It does have an area on this side where the steel is exposed, this is for welding, so it is designed to get welded on to the side of your ball mount or weight distribution head assembly. Welding should be done, or performed by a qualified professional welder. Taking a few measurements of the sway control tab, starting with the overall length, it's going to give us a length measurement of 5 inches. The width measurement is going to be right at 2 inches.
The thickness of the tab, that's going to measure about 3/8ths of an inch in thickness. The hole on the unit is going to give us a diameter of 5/8ths of an inch. That's going to do it for today's look at the Curt Weld-On Sway Control Tab.
Average Customer Rating: 4.6 out of 5 stars (32 Customer Reviews)
VERY disappointed that carton had no - zero! - packing material inside! A heavy bracket was packed in with a light bar - fragile item - in an average weight cardboard carton. It does not take Einstein himself to calculate the risk factor here! The lights inside the light bar had come out of their sockets and were ALSO rattling around in the carton! Please teach your people how to pack cartons correctly!!
This sway control package is just what we needed! After towing our 3300 lb camper home with my wifes Jeep Cherokee, WITHOUT an anti-sway bar, I said I wasn't towing the camper anywhere until we had this installed. We drove in 20-30 mph crosswinds the entire 4+ hour drive back. With this installed, we hardly notice it. Now, you can't get rid of the wind itself, but you certainly don't have to worry about the trailer starting to move around on it's own - this is great for stabilizing everything.
Easy to install - just used the template they include with it, and then just drilled some holes through the frame of the camper and installed the hitch, hooked up and we were ready to go. We only use Curt products for our vehicles, utility trailer, and camper - nothing compares in my opinion.
Had professional welder weld Sway bar tab to hitch for $20. Used for towing 23 foot rv trailer. Great solution for when you need a sway bar and you can’t get a pre made Hitch with sway bar tab
Simple product that welds to the hitch but is needed with the sway control.
i received the sway control plate very quickly it was as i expected the correct part i also installed the curt trailer hitch receiver #c-15300 i like to say that also is a great part was delivered very quickly on installing very easy and simple to do hardest part was removing old trailer hitch bolts in total the job took 2-1/2 hours two of the hours was removing old hitch i recommend this hitch for series towing. let me say again great hitch and sway control plate thanks again.
Product was delivered on time as promised and was of the quality that I expected. Will use this company for future trailer needs.
Don C.
6/17/2015
It works fine.
Product is well built. I needed an antisway tab on the opposite side from the product pictured online, so I called and asked whether etrailer had a separate tab that I could weld where I needed it. Etrailer had it and the two items arrived very quickly by mail.
I now have the ball height I wanted and a good short distance from ball to bumper--and the antisway tab ball mount.
The setup should be just right for towing my 16' Casita with the Chevy Trail Blazer.
Could be better not a very square cut...I put a square on it and has a small angle ...I will grind a little off to make it true to mate up to my hitch before I weld it on.....thanks
Only problem was that it took 2 weeks to deliver. The package came to my city but was damaged and returned. An other one was sent to me. It is a good heavy duty product.
You shipped it in a envelope. It arrived empty with a big tear in it. This item is clearly to heavy to be shipped this way.
Brooke M.
8/31/2022
Thank you for reaching back out. I will send our information to our customer service team and they will be in touch with you.
Item arrived very fast and was exactly as describe. Needed this to add a sway control to my trailer.
Ball plate was absent from one set that bolts on side of tongue
Excellent and it works very well.
Keenen K.
6/27/2015
It is working very well.
Pretty simple product. Works as described. No issue
This was just the ticket! Works perfect ly.
Perfect fit quality products
Great product fair price
Thanks
Good sturdy product
Excellent service and part is what I ne eded
quick delivery, nice solid piece to weld on!
Great customer service!
Quality products and great service.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jr
11/24/2017
Still working