Dual Sway Control Bracket for Gen-Y Adjustable Ball Mounts with 2" Receivers
(6 reviews)
Price: $113.99
In Stock
Dual Sway Control Bracket for Gen-Y Adjustable Ball Mounts with 2" Receivers
Item # 325-GH-300-1
Our Price: $113.99
In Stock
- All Info
- Reviews (6)
- Q & A (0)
- Videos (2)
- Photos
Gen-Y Hitch Accessories and Parts - 325-GH-300-1
- Drop Hitch
- Trailer Hitch Ball Mount
- Sway Control Parts
- Brackets
- Gen-Y Hitch
Install this adapter on the 2-ball mount insert used with your Gen-Y adjustable ball mount so that you can attach up to 2 friction-style sway controls (sold separately) to your towing setup. Powder coated steel is durable and rust resistant.
Features:
- Adapter bracket provides attachment points for friction-style sway control units (sold separately)
- Attaches to the 2-ball mount insert used with Gen-Y adjustable ball mounts that have 2" stacked receivers
- Allows for use of friction sway control without a weight distribution system
- 2 Mounting points allow you to attach a sway control on either side of the ball mount or to use 2 units at once
- Durable steel construction
- Zinc primer and epoxy powder coat resist corrosion
- Attachment pin and clip included
- Made in the USA
GH-300-1 GenY Hitch Dual Sway Control Adapter for 2" Receivers
Video of Dual Sway Control Bracket for Gen-Y Adjustable Ball Mounts with 2" Receivers
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Gen-Y Hitch Dual Sway Control Bracket Adjustable Ball Mount 2" Receiver - 325-GH-300-1
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this dual sway control bracket for Gen-Y adjustable ball mounts with two-inch receivers. This adapter bracket easily installs on your two-ball mount insert used with your Gen-Y adjustable ball mount that have two-inch stacked receivers, providing attachment points for friction style sway control units without a weight distribution system. The two mounting points allow you to attach a sway control on either side of the ball mount or to use two units at once. This is made in the USA of a durable steel construction.
The zinc primer and epoxy powder coat resist corrosion. And the attachment pin and clip are included. Now, I happen to have a Gen-Y adjustable two-ball mount with stacked receivers for two-inch hitches right here just to show you how easy this is to install. So, I'm just gonna go ahead and with the included pin and clip, I'm gonna line up the holes here and then put in the clip, and we are in business. So, you can see how easy this is to mount onto the ball.
And it's gonna be no problem at all. So, you're not gonna be struggling there at the back of your vehicle, trying to get this on. This does include this screw here to take the rattle out of the bracket if you need to. So, that's going to be adjustable to the point where you like to get that rattle out. So it's again, gonna be a very easy operation, very easy install.
For your reference, I am including our item number for this Gen-Y adjustable two-ball mount with the stacked receivers for two-inch hitches in case you wanna check that out on our website as well. Just take that item number that you see on your screen, put that in the search field of our website here at etrailer.com and it'll take you to this product. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Dual Sway Control Bracket for Gen-Y Adjustable Ball Mounts with 2" Receivers - 325-GH-300-1
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
Install this adapter on the 2-ball mount insert used with your Gen-Y adjustable ball mount so that you can attach up to 2 friction-style sway controls (sold separately) to your towing setup. Powder coated steel is durable and rust resistant.by: Robert04/20/2023
Pull a 24ft enclosed and definitely helps with the sway. Easy to attach.
by: Alan05/07/2022
Awesome, exactly what I needed.Works as expected.
by: Jason09/15/2021
by: Elizabeth 06/04/2021
by: Nicole 06/08/2021
6
6
See what our Experts say about this Gen-Y Hitch Accessories and Parts
- Will Dual Sway Control Bracket # 325-GH-300-1 Work with Draw Tite Sway ControlYes the Dual Sway Control Bracket # 325-GH-300-1 that you referenced would work great with the Draw Tite sway control part # 83660 that you mentioned.
view full answer... - How To Use Dual Sway Control Bracket With Gen-Y Torsion 2-Ball MountThe Dual Sway Control Bracket for Gen-Y Adjustable Ball Mounts with 2" Receivers part # 325-GH-300-1 will attach to the bottom hitch ball on the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers part # 325-GH-1226 and then allow for sway control bars to be added, the Curt Friction Sway Control for Weight Distribution Systems part # 17200. If this was not what you are asking please clarify which specs you are looking for.
view full answer... - Will The Dual Sway Control Bracket For Gen-Y Adjustable Ball Mounts Fit A 2" & 2-5/16" Ball Mount?Yes, the Dual Sway Control Bracket for Gen-Y Adjustable Ball Mounts with 2" Receivers # 325-GH-300-1 will work with a 2", and 2-5/16" double ball mount. This product is also compatible with all the GEN-Y Versa-Ball Mounts, like # 325-GH-224.
view full answer... - Is Dual Sway Control Bracket Compatible With Gen-Y Phantom X Adjustable Ball MountYes, but you would have to add the replacement 2-ball mount for the standard Gen-Y in order to secure the bracket. So what you would need is the following: - Gen-Y Phantom X Adjustable Ball Mount w/ Stacked Receivers for 2" Hitch - 10" Drop/Rise # GY59VR - Replacement 2-Ball Mount for Gen-Y Adjustable Ball Mounts # 325-GH-031 - Dual Sway Control Bracket for Gen-Y Adjustable Ball Mounts with 2" Receivers # 325-GH-300-1 So you could do that in order to use a friction sway control system...
view full answer... - Availability of Sway Bar Bracket that Fits Gen-Y Adjustable Ball MountsWe do have an adapter for the Gen-Y adjustable ball mounts that allows it to be used with sway control with the part # 325-GH-300-1.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Written by:
Alexander C
Installed by:
Ed W
Installed by:
Andy C
Video Edited:
John S
Video by:
Samuel H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.