Lowering Boat Trailer Converted to Flat Bed Trailer
Question:
Hi. i have a boat trailer that got converted into a flat deck over trailer and it rides to high so i need to lower it. what is the best way to do so?
asked by: Sergio F
Expert Reply:
If your trailer already has an over-under kit like # K71-385-00 to put the leaf springs above the axle, then you simply need to remove the kit to put the axle on top of the leaf springs using the factory mounted spring seat on the axle. This will lower the trailer by the diameter of the axle as well as the height of the leaf spring stack.
If you need to further lower the trailer, then shorter spring hangers are needed. I recommend the CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On # CE14026G. This will allow you to simply remove the old hangers and bolt on new shorter hangers.
The last option is to use a drop axle like # 8327872 or # 8327812 that will lower the trailer by 4 inches. The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Drop Spindle - Regular Tires - 2,000 lbs # ASR2KHDS05 is another option that will replace the leaf springs and the axle allowing you to lower the trailer but you will need a 2 inch square bar cut to custom length used in the integrated holes of the assemblies. I've linked the page to all your axle options.
Products Referenced in This Question
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- Drop - 4 Inch
- Dexter
more information >
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 94" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 7000 lbs
- Spindles Only
- 78-1/4 Inch Long
- 94 Inch Long
- Drop - 4 Inch
- Dexter
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Drop - 4 Bolt Flange - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
- Accessories and Parts
- Trailer Suspension Parts
- Brackets
- CE Smith
more information >
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: 7000 pound axles
- Search Results: 8000 pound axles
- Shop: Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 8 on 6-1/2 - 94" - 7,000 lbs
- Search Results: trailer air ride suspension
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 94" Long - 7,000 lbs
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: What is Height Difference Between 10 Degree Down and 45 Degree Down Torsion Axle
- Q&A: Does Drop Axle Raise or Lower the Trailer
- Search Results: trailer axles
- Search Results: spring hanger
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Search Results: trailer fender
- Search Results: axle mounting hardware
- Shop: Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only
- Shop: Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Shop: CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
- Shop: CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 13" Wheels - Qty 1
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 30-20 Review
- Video: Review of CE Smith Trailer Leaf Spring Suspension - CE14026G
- Video: Review of CE Smith - Trailer Leaf Spring Suspension - CE14035G40
- Q&A: Does CE Smith Trailer Suspension Hanger Have Weight Capacity
- Q&A: What Size Bolt-On Leaf Spring Hangers Are Available
- Video: Review of Titan Brake Actuator - T4820000
- Video: Review of etrailer Straight Tongue Trailer Coupler - Standard Coupler - CT-3001-Z
- Q&A: Hanger Spacing Needed for Single Axle Trailer with 25-1/4 inch Long Leaf Springs
- Q&A: Single Axle Trailer, Should the Hanger or Shackle Be on the Front of the Trailer Frame
- Video: Review of Trailer Valet Removable Wheel For JXS Trailer Jacks - TV89FR
- Q&A: Recommended Bolt On A-Frame Trailer Jack For Karavan 6' X 12' Utility Trailer
- Article: Where to Position the Trailer Axle?
- Article: How to Raise Your Travel Trailer Height