Non-Slip Adhesive Safety Strips, 1" x 11" (Qty 4)
(9 reviews)
Price: $23.29
In Stock
- All Info
- Reviews (9)
- Q & A (0)
- Videos (1)
- Photos
Brophy Accessories and Parts - NSAS
- RV Steps
- Grip Tape
- Brophy
- 1 Inch Wide
- 11 Inch Long
Safety Strips for Scissor Stairs and Steps
- 1" x 11" adhesive non-slip strips
- Quantity: 4 strips
- Great for additional traction on any scissor steps
Video of Non-Slip Adhesive Safety Strips, 1" x 11" (Qty 4)
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Brophy RV and Camper Steps NSAS Review
Today, we're going to review part number NSAS. These are the Brophy Non-Slip Adhesive Safety Strips. These safety strips are designed for the steel and aluminum scissor stairs and steps. This part will come with a package of quantity of four strips. These are great for additional traction to any scissor steps. The size on each strip, they are 11 inches long and 1 inch wide.
Now, this package does contain four separate strips and these are a non-slip adhesive and they are stretchable to conform to a diamond tread on the steps. That should do it for review on part number NSAS.
Customer Reviews
Non-Slip Adhesive Safety Strips, 1" x 11" (Qty 4) - NSAS
Average Customer Rating: 4.3 out of 5 stars (9 Customer Reviews)
by: Carl C07/19/2014
Two packages of these were purchased to reduce the possibility of slipping on the new camper steps I purchased at the same time. I found that they went on easily and provided the additional level of safety I was looking for. Since they have just been installed, I cannot speak to their durability, but that will be discovered after some time in use.
by: Duane M.05/12/2015
The scissor steps were just what I wanted. Stronger than aluminum and cost effective. The skid strips however are less than what I would have ordered, my fault I didn't ask for a description. A one inch skid strip per step isn't going to do much.
by: Stephen02/25/2018
The non skid strips were exactly as promised. etrailer.com did an excellent job of keeping me updated on the order throughout the process!
by: Sid H.11/20/2013
I ordered these for the fold down foot bar on my Skeeter center console boat and they work GREAT!! The bare aluminum was just too slippery with wet feet.
by: Gary M.10/26/2016
Great customer service and quality prod ucts.
by: Staci01/10/2021
One of the strips we received fell apart as soon as we took it out of the package. Coming apart on both ends...
by: Dennis S10/20/2015
Well put together steps.
by: Ludwig08/04/2021
the product is excellant. thamnks
by: Wayne 11/26/2021
9
9
See what our Experts say about this Brophy Accessories and Parts
- Traction Strips Recommendation for Rear Ramp of Toy HaulerYour best option for adding traction to the ramp of your toy hauler will be the Non-Slip Adhesive Safety Strips # NSAS which are 1 inch by 11 inch. You'd want to order several sets based on what the ramp would need. This would adhere do the ramp door easily and would not smell bad!
view full answer... - Dimensions Of Brophy Hitch Stair With 2 Steps For 2 Inch Trailer HitchesThe steps on the Brophy Hitch Stair part # RHS2 measure 6 x 17 inches. I have attached a photo of the hitch stair with the dimensions noted you can check out. The rise between the two steps measures 10 inches, and the top step is 5-1/4 inches above the top of the shank that slides into the 2 inch receiver. The bottom step is 3 inches below the bottom of the shank. This stair has a 250 lb weight capacity. I also recommend the pin and clip, part # PC3. If you are looking for a locking hitch...
view full answer...
- Non-Slip Adhesive Safety Strip Installation for Pool UseThe Non-Slip Adhesive Safety Strips, 1" x 11" (Qty 4) # NSAS need to be applied to a completely dry and clean surface. Once they are attached, they will be able to stay in place on your pool ladder or steps.
view full answer... - Will The Brophy Non-Slip Adhesive Safety Strips, # NSAS, Work On Indoor And Outdoor Wooden StepsI called the supplier (C.R. Brophy) on the Brophy Non-Slip Adhesive Safety Strips, # NSAS, and they said they are designed for the steel and aluminum steps. They can be used indoors or outdoors. As far as working on wood steps they did stay that the strips will adhere to the wooden steps they just do not know how long that the strips will last on wooden steps if used outdoors. They have only tested them for durability on the steel or aluminum steps.
view full answer... - Mounting Bracket for Brophy # AS04 Aluminum Camper Scissor StepsThe Brophy Aluminum Scissor Steps you referred to, part # AS04 includes a mounting bracket and hardware as shown in the product description photos, so you won't need anything else to install the steps. Available options include a handrail, part # AHR4 and non skid strips, part # NSAS.
view full answer...
- What Is Package Size And Shipping Weight For Brophy Steel Scissor Steps # SS04I went to our warehouse and measured the box that the Brophy Steel Scissor Steps, part # SS04 are packaged in. The box measures 10 inches wide, 19 inches long, and 13 inches tall. The shipping weight for these steps is 34.17 lbs. The step size for this item is 18 inches wide and 6 inches deep. These steps have a weight capacity of 300 lbs. When retracted, these steps measure 11 inches tall. For added safety I recommend the Non-Slip Adhesive Safety Strips, part # NSAS. These are 1 inch...
view full answer... - Can the Brophy Steel Scissor Steps be Installed on a Truck TailgateYes, you can mount the Brophy Steel Scissor Steps, # SS04, to a truck tailgate. I recommend installing the mounting bracket on the top of the tailgate (see photo). To install the mounting bracket, you will want to use four 1/4 inch x 1-1/2 inch long lag screws. Brophy recommends pre-drilling the holes with a 5/32 inch drill bit. You may also be interested in the Non-Slip Adhesive Safety Strips, # NSAS.
view full answer...
- Weight of Steps # AS04 and # SS04 The weight of the # AS04 steps is 21 lbs, and these have a weight capacity of 250 lbs. The weight of the # SS04 steps is 37 lbs, and these have a weight capacity of 300 lbs. For safety purposes, I also recommend using some Non-Slip Adhesive Safety Strips such as Item # NSAS and the Aluminum Hand Rail for 4 Step Scissor Stair, Item # AHR4. I've attached a video review for each of these products for you to check out.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jeff D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.