Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Mounting kit lets you install your Tow-Rax removable wheel chock with a 3-point mounting system. Includes hardware for wood floor and metal floor installation.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a real quick look at this Tow Rax Mounting Hardware for Removable Wheel Chock. Now this hardware will let you mount your Tow Rax Removable Wheel Chock to either a wood or metal floor and this is going to work with chocks that have a three point mounting configuration and this kit includes everything that you see here on my table before me. You're going to receive these mounting bases and in case you we're interested, they do measure right at two inches in diameter and the inner diameter there is a half an inch. So you're gonna get the bases, the wood screws and the nuts and bolts that you'll need to install this. This will require drilling for installation.
So this hardware is from Tow Rax and that's going to conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.8 out of 5 stars (26 Customer Reviews)
Mounting kit lets you install your Tow-Rax removable wheel chock with a 3-point mounting system. Includes hardware for wood floor and metal floor installation.Perfect install
Used with my Condor chock in my toy-hauler. 3600 miles and my Street glide stayed upright and in the same place.
Was looking for a flush mount system for a removable wheel chock into my toy hauler. This product filled the bill. Easy to install, I was able to place them where I needed them to be, off centered and over bracing, drilled the holes into the wheel chock to match. Walla
These a great mounting points. I made an additional backing piece by drilling holes in a fender type washer and mounted the backing under the trailer floor. I had the occasion to move a set inside a cargo trailer. I simply cut a piece of dowel rod and secured it in the hole with wood glue I order to patch the existing hole. Mine hold M/C wheel chocks. When I remove the chock I thread an Allen screw into the center hole.
I purchased these to use them as advertised and they have worked great so far. You'll need about a 9/16" drill or just slightly larger. Couldn't figure out if it was running on metric sizes so that might be the issue. Anyways you drill your hole and the back side in relation to the pic provided on this website is actually the top side, has a hex hole so you take an Allen key to screw it down. Once you have that part you can drill some small holes to bolt the three remaining screws and bolt them down with the nuts. I could not access my trailer undercarriage because it is enclosed so I used some heavy coarse thread nickel plated screws to secure it. I feel comfortable these mount plates will hold good. The tie down straps do the real work so make sure those are real secure but this makes placing and removing the wheel chocks easy. I also powdercoated mine just because.
Secures my trike great. Easy to install. Would buy again.
Roy
2/25/2023
Works great makes for easy tie downs of motorcycle and trike.
Really the best type of fitting for a motorcycle wheelchock that I found. Easy to fit but you do have to get to the underside of the trailer deck to fit the nuts/washers. Seems to be a solid , secure attachment method and I have had no issues with any loosening
Worked GREAT in my trailer for motorcycle wheel chocks !
Good mounting option strong hold, price could be a little better
Looked but couldn't find this product anywhere else but etrailer. Thanks for making it available
These are super easy to install. Work really well for installing, removing, or moving motorcycle mounts in my trailer. Also work with mounts other than Tow-Rax.
Sturdy wheel chock mounts. Makes installation & removing quick and easy.
Easy to install and they haven't let me down. Good way to mount my wheel chock in my trailer and still be able to remove it quickly.
Made a very secure attachment point for motorcycle wheel chock.
Easy to install
Haven't installed this yet but it looks like great hardware. Be happy to provide and update once the installation is done.
Solid product that performed as advertised and was delivered fast and easy.
Very nice parts. Easily installed. Great customer service.
great product!! easy install
Received quicker than expected.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Crs
10/17/2022
After a year of use these are still performing witout failure.