Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces 1 shark fin style mounting bracket on your Furrion Vision S wireless RV backup and observation camera system (729125, 729936, or 732556). The pre-wired shark fin shaped bracket provides a waterproof housing for the camera.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Furrion wireless observation or backup camera pre-installed mounting kit. Now this short finned shaped bracket will provide a nice waterproof housing for your Furrion camera system. This bracket is designed to be used with the Furrion wireless backup system. Part number FRC12TA-BL or the wireless observation system, part number FOS48TA-BL. Both of those items are sold on our website separately. Now this will include the six foot camera power cable with the pigtail end for connecting to your power source and then the other end is what will plug into your camera.
It includes a nice set of detailed mounting instructions. Basically this plate right here is what you'll remove. When you take that cover plate off, the camera's designed to fit right into and line up with those screws. Then, you use the screws that when you took the plate off, just use those screws to install the camera. If you'll notice on the back here, has a nice rubber gasket that's used so when you're camera's in there you'll just run your wire through your RV or trailer, through that hole there right to your camera. Then this will just install to your vehicle with these four mounting holes.
That should do it for the review on the Furrion Wireless Observation or backup camera preinstalled mounting kit.
Average Customer Rating: 4.8 out of 5 stars (239 Customer Reviews)
Replaces 1 shark fin style mounting bracket on your Furrion Vision S wireless RV backup and observation camera system (729125, 729936, or 732556). The pre-wired shark fin shaped bracket provides a waterproof housing for the camera.We have been dealing with trailer for the past three years and find their services to be outstanding. They have answered our questions and delivered the parts to keep us safe & on the road. When a heavy winter last year broke the mounting bracket for our remote camera, we were very much relieved to have a replacement, as the camera was intact. ( Significant savings on a good design- although the mounting bracket is plastic, it is separate from the camera)
Amazing product for putting in or replacing your camera fin for furrion system also comes with the cord to plug in your camera to instead of direct wiring your camera to the rv
Everything I have ordered from trailer has been top notch. Shipping is always fast and items always work as described. Highly recommend
I bought a new camper and it said camera ready. So instead of having the dealer in stall their camera's at $[XX] plus Labor I bought a Amtifo wireless rear view camera kit off [online] for about $[XX]. it showed a furrion bracket,but when I got it ,there was no sharkfin bracket. I found one on etrailer for about [XX] dollars. And etrailer sent it right out with the wire hookup.I am very impressed with etrailer and will look there first to avoid headaches. Thank you etrailer. Here are a couple pics of the cap on back of camper and the finish install.
My original part was damaged when it was moved from my old trailer to a new one. Part is exactly what I need. It was delivered quickly.
On a 42’ 5th wheel it fails to work oft er
Doyle
9/5/2023
I have found that there is a lot of disruptions. My RV is 40ft and there are times it just will not connect.
Product is exactly what the supplier stated it was.(We only needed our backup camera housing.OurRV dealer would only sell us the whole camera package).Supplier did offer another choice as this product was on back order. I chose to keep the original product. It arrived in a timely manner.It fit perfectly. We will be buying other items from them.
Effectively replaced the existing shark fin, fits the camera like the original mount
Product was received in a timely manner. Appears to be of good quality and a direct replacement for my original Furrion mounting bracket.
Very satisfied the product was as advertised.
Thanks!
JT
We bought this for a factory installed look of our rear backup camera. Our Springdale Mini came equipped with a backup camera install point but didn't have this trim piece needed for our camera we purchased on Amazon. This looks great and functions perfectly.
Ordered part from ETrailer. The part was late from the manufacturer but the team at ETrailer kept me informed throughout the process all the way to delivery. A+ customer service.
Arrived faster than we expected, and it was easy to install.
Kind of spendy but I needed this part as I was hitting the road soon. Very helpful customer service and had the part to me when I needed it, Thank you for your help!
Perfect fit. I only needed the cover but no one sells the cover separately.
Arrived quickly, worked as advertised.
Perfect fit. Camera is operating again.
This, Replacement Shark Fin Camera Mounting Bracket for Furrion Vision S RV Camera Systems - Black works perfectly! I need another shark fin to use since we are taking our camera with us for the new trailer. This cover is similar to the original and looks great. The quality appears to be OEM and with the included wiring, it allows you to have power ready to connect to your camera. Shipping was quick also. We’re definitely going to purchase more from etrailer in the future!
Thetruthsayer
8/11/2022
It has performed as described. No issues, no leaks. It’s a great fit!
Ordered the part and received it in fast delivery
Great service. Quick and simple.
Looks nice and easy to put on, thank yo u.
Bracket was exactly what I needed and ordered. Great quality.
Matthew
7/24/2023
It is perfect. Still works great.
wow great service, order was delivered in 2 days, installation was easy, only took about 30 minutes. I would recommend ETRAILER to anyone.
Easy to add to the camera ready area on my 5th wheel. Behind the trailers cap were the wires to the running lights where I spliced into. Added the Furrion mount and my Amtifo camera and was done in no time. Great product to use with a non Furrion camera system with a Furrion bracket. This product has a nice gasket which eliminated the need for caulking, which can get messy
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David B.
10/8/2022
Yeah that can happen sadly. The longer the unit the more things you have to mess with reciprocity.