Blue Ox Accessory Kit for Alpha 2 Tow Bars - Tail Light Wiring - 7-Way to 6-Way Cable - Lock Set

See what our Experts say about this Blue Ox Accessories and Parts

• Parts Needed to Flat Tow a 2015 GMC Sierra 1500 SLT
  The correct base plate kit for your 2015 GMC Sierra 1500 is the Blue Ox kit part # BX1711 that you referenced. Between the two wiring kits you referenced the correct one will be the one that will match the connector you have at the back of your 2014 Tiffin. If you have a 7-way there you would want the # BX88231. If you have a 6-way round there you would instead want the # BX88190. The # BX88231 does not come with safety chains, the # BX88190 does so you would need the # BX88197 if you...
  view full answer...
• Can Blue Ox Towing Accessories Kit Tow Bars Wire to Vehicle with Combined Circuits
  The wiring kits of the # BX88231 will work well on your 2006 Jeep Liberty. Even though your vehicle is wired for separate turn signals from stoplights this kit can wire so that your taillights will activate with combined circuits which will work just fine. The dual intensity bulbs of your vehicle taillights will blink and illuminate correctly with the stoplight circuits of your vehicle. Or you can use the bulb and socket kits that come with the kit which would provide the same function. I...
  view full answer...
• Follow-Up for JEFF LAYTON
  I recommended the Roadmaster Wiring kit, part # RM-154 because it has diodes included which help prevent any electrical feedback from your RV, so it does help protect your electrical system. There is another option you may be interested in. It is the Blue Ox Towing Accessories Kit for Alpha and Aventa LX Tow Bars, part # BX88231. This kit includes a 7-wire to 6-wire harness, a bulb and socket tail light kit with all required wiring, a receiver lock that secures the tow bar to the RV,...
  view full answer...
• Is an Adapter Needed To Flat Tow a 2012 Jeep Wrangler if the Motorhome has 7-Way Blade Connector
  As long as the 7-way on your Motorhome is wired as a combined system (which is how most are wired) then you will not need a taillight converter. If the motorhome connection is combined, the umbilical is combined (7-way and 6-pin cord), and the Jeep is combined, all the systems are combined and compatible. To test and make sure that the 7-way is wired as a combined system, you can use a circuit tester like the Draw-Tite Circuit Tester # PTW2993 and test the blades on the 9 o'clock position...
  view full answer...
• Recommended Flat-Towing products For 2008 Honda Fit
  There are five items you need when flat-towing your 2008 Honda Fit. You need base plates, a tow bar, safety cables, lighting for your Fit, and most states now require a supplemental brake system. The base plates I recommend are the Blue Ox Base Plates, part # BX2252. For a tow bar I recommend the Blue Ox Alpha, part # BX7380. This tow bar lets you hook up your towed vehicle, even when you are on ground that is not level. For safety cables I recommend part # RM-643. I also recommend...
  view full answer...
• Adapter For Flat Towing Behind Motorhome with 4-Pole Trailer Connector
  You'll just need a 4 pole to 7-way adapter likee # 37185. Ground the white wire on the adapter to the motorhome chassis, plug in the 4 pole connector on the adapter to the 4 pole connector on the motorhome, coil up the remaining wires and tuck them up out of the way and you're done. If you'd like the RV battery to deliver a maintenance charge to the battery of the towed vehicle, you'd need the # ETBC7L install kit. The kit includes the 37185 adapter, and a wire that will need to be ran...
  view full answer...
  

Do you have a question about this Accessories and Part?