Customers compare uf39-941705 to these similar products
Products Featured in this Video
Today we're going to be taking a look at the Ultra Fab Power Twin II electric stabilizer with dual motors. Offering thirty inches of lift and a 6000 pound weight capacity, it's part number UF39-941705. The twenty-two inch lift model with the 6000 pound weight capacity is part number UF39-941707. For those of you that don't have a power supply available these are also available in a manual… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The mounting bracket for the Ultra-Fab Power Twin II Manual Stabilizer #UF39-941704 is approximately 35-3/8" in length. The frame height would dictate the amount of lift you would want but there are other factors to take into account. The…
view full answer...When it comes to weight distribution, tongue weight is the most important factor. It looks like you are ahead of the game and accounted for that with each of these systems, great job. I would still recommend finding your actual tongue weight once…
view full answer...The differences between the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW Item #EQ37120ET and the Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 12K GTW, 1.2K TW Item #RP66560…
view full answer...If you're talking about a space to sit between the mounting brackets of the Ultra-Fab Power Twin II Manual Stabilizer #UF39-941704 and the frame of the trailer then no, this stabilizer does not have spacers. If you're trying to gain more…
view full answer...The Ultra-Fab Power Twin II Manual Stabilizer for Trailers and RVs #UF39-941704 measures 5" from the trailer frame to the lowest hanging part of the jack. I confirmed this with my contact at Ultra-Fab. Since your trailer has a lower profile it…
view full answer...I would be happy to help. The Loadstar ST185/80D13 Bias Trailer Tire w/13" White Modular Wheel - 5 on 4-1/2 - Load Range D #AM3S333 you were looking at for your 17' Hybrid trailer has is 7.2" wide and 24.4" tall. The closest…
view full answer...The bracket length of the Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors part #UF39-941705 is 36". It fits trailers and RVs with frames from 8" to 80" wide. The bracket length of the Ultra-Fab Power Twin II Electric…
view full answer...We have the Ultra Fab Stabilizer jack set part #UF39-941705 which has a 6,000 lb capacity and would work well on your 2015 Jayco travel trailer.
view full answer...The measurement you will need is from the outside of the frame. The Ultra-Fab Power Twin II Stabilizers #UF39-941707 can be adjusted between 48-77 inches wide. The mounting brackets will sit under the frame with the outside of the angled metal…
view full answer...Typically stabilizer jacks and leveling jacks are the same thing. The Ultra Fab part #UF39-941705 can do both as well. It can lift up to 30 inches from where the jacks are mounted on the trailer. When the jacks are at their max height they have a…
view full answer...The Ultra-Fab Power Twin II Electric Stabilizer for Trailers and RVs - 22" Lift - 6,000 lbs #UF39-941707 is a great product, but will only give you 3 inches of lift as you mentioned. That would be enough if you were always camping on level or…
view full answer...I attached a picture that shows the install instructions for the Lippert Components High-Speed Power Stabilizer Jack #LC298707 that you referenced and in it you'll notice a set distance isn't specified for where it has to install on the…
view full answer...