Master Lock Trailer Hitch Receiver Lock Review 1479DAT Video

No, all of the BOLT locks like the BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches #BLT99FR you're looking at are coded to the vehicles key - there are no options that just use a regular key. You could just use a standard…

After a long period in place a lock mechanism can stick and make it tough to get the key in it, or to get the inserted key to turn. There are a few suggestions I can offer to you to get your lock #1480DAT open. You can spray a bit of aerosol white…

Yes, the Curt Channel Style Adjustable Ballmount item #C45901 can adjust for a zero to 1" rise. The shank can be flipped for a max rise of 5-1/4" and drop of 6-3/4" but it doesn't have to be with the adjustability of the channel.…

To lower the ride height for your Yakima OnRamp Bike Rack #Y36FR I recommend using the Stacked Receiver #325-GH-304. The Gen-Y Phantom Hitch Ball Mount #GY27VR you found should only be used with Gen-Y towing attachments.

You are on the right track but you need to use the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers item #325-GH-315 instead. This ball mount is rated to be used with a flat towing set up and a bike rack. The Gen-Y Phantom Hitch Ball Mount item…

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I attached…

The AMPLock #AMP37FR is designed to fit on 2" receivers, so it will work on your 2020 Ford F-150's factory receiver. This hitch pin has a 2-13/16" span.

Technically, chrome is harder than stainless steel but it isn't going to be a difference between stopping a thief or not stopping one. If a thief really wants to, they'll be able to remove any lock, locks are more of a theft deterrent and…

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…

You can get more drop but will need a new shank for the Curt Trunnion Style Weight Distribution System #C24UR. The same exact system does not come with a different shank, which is why you'll need to get the shank separately. For 8 inches of drop,…

Just like the propane/electric models, in order for the liquid refrigerant to flow throughout the unit properly, the EverChill Refrigerator #324-000119 will need to be mounted within 3 degrees off level side to side and 6 degrees off level front to…