Which AMPLock for 2 Inch Factory Hitch on 2020 Ford F-150

Question

Question:

Which model amplock hitch pin lock do i need for a 2020 Ford F150 factory installed 2inch receiver?

asked by: Jim

1

Helpful Expert Reply:

The AMPLock # AMP37FR is designed to fit on 2" receivers, so it will work on your 2020 Ford F-150's factory receiver. This hitch pin has a 2-13/16" span.

expert reply by: Erik B

1

Answer 1

No, all of the BOLT locks like the BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches #BLT99FR you're looking at are coded to the vehicles key - there are no options that just use a regular key. You could just use a standard…

view full answer...

Answer 2

Yes, the Curt Channel Style Adjustable Ballmount item #C45901 can adjust for a zero to 1" rise. The shank can be flipped for a max rise of 5-1/4" and drop of 6-3/4" but it doesn't have to be with the adjustability of the channel.…

view full answer...

Answer 3

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I attached…

view full answer...

Answer 4

To lower the ride height for your Yakima OnRamp Bike Rack #Y36FR I recommend using the Stacked Receiver #325-GH-304. The Gen-Y Phantom Hitch Ball Mount #GY27VR you found should only be used with Gen-Y towing attachments.

view full answer...

Answer 5

You are on the right track but you need to use the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers item #325-GH-315 instead. This ball mount is rated to be used with a flat towing set up and a bike rack. The Gen-Y Phantom Hitch Ball Mount item…

view full answer...

Answer 6

The tongue weight rating of the B and W adjustable ball mount part #BWTS20066BMP is based on which ball you use. If you use the 2 inch ball it has a tongue weight capacity 750 lb and with the 2-5/16 inch it is 1,800 lb.

view full answer...

Answer 7

Hey Naron, the distance from the center of the hitch pin hole to the anti-rattle on the Diversi-Tech Ball Mount #DTSTBM6600-2S is right at 2 inches. I am not sure where you saw that is was 3.5 inches but that is too long.

view full answer...

Answer 8

There is a way for you to not only lock the B&W Tow & Stow 3-Ball Mount - Compatible with GM MultiPro Tailgate - 2.5" Hitch - 148K #BWTS20067BMP to your 2-1/2 inch trailer hitch, but also the ball platform to the mount, and the hitch…

view full answer...

Answer 9

For a stainless steel locking hitch pin that is compatible with the 2-1/2" hitch receiver on your 2011 Chevrolet Silverado 3500 HD we have the Curt #C23519. This includes 2 keys, is 5/8" in diameter, and has a usable pin length of…

view full answer...

Answer 10

Hitch pins like the Curt Reciever Lock part #C23519 that you referenced do not have weight ratings because they do not actually bear any weight, the key is to find one that is long enough for the hitch on your vehicle. The #C23519 has been confirmed…

view full answer...

Answer 11

I don't have a way to verify fit of the AMPLock Trailer Hitch Receiver Lock part #AMP37FR on a 2020 Toyota Tacoma but we can offer you this same pin with a longer usable span, the AMPLock Trailer Hitch Receiver Lock for 2-1/2" or 3"…

view full answer...

Answer 12

The distance from the center of the #DTSTBM6600-2S hitch pin hole to the center of the anti-rattle pin on top of the shank is 3-1/2".

view full answer...

Which AMPLock for 2 Inch Factory Hitch on 2020 Ford F-150

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching