Review of etrailer Hitch Locks - Standard Hitch Pin - E98881 Video

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

The span of a locking hitch pin like the Blue Ox #BX8858 means the amount of space that can fit between the two walls of the hitch receiver- so yes, basically the distance from the outside wall of one side of the receiver to the other. We have…

Yes, the etrailer Trailer Hitch Receiver Lock - Extra Long - Flush Design for 2-1/2" Trailer Hitches part #e98881 is the best option for the 2018 Toyota Tacoma with a factory hitch. The factory Toyota hitch receivers have thicker side…

Hey Naron, the distance from the center of the hitch pin hole to the anti-rattle on the Diversi-Tech Ball Mount #DTSTBM6600-2S is right at 2 inches. I am not sure where you saw that is was 3.5 inches but that is too long.

It's a wire color difference but not a function difference on the pins of the 7-way. The difference comes from the fact that the two different styles are representative of two different areas that uses trailers. Traditional is usually seen…

There is a way for you to not only lock the B&W Tow & Stow 3-Ball Mount - Compatible with GM MultiPro Tailgate - 2.5" Hitch - 148K #BWTS20067BMP to your 2-1/2 inch trailer hitch, but also the ball platform to the mount, and the hitch…

For 2-1/2 inch hitches we have the hitch lock part #e98881 which is going to be a great option for you. It has a usable span of 3-5/8 inches which would easily fit your hitch and ball mount. This has a 5/8 inch diameter which is the correct size for…

The distance from the center of the #DTSTBM6600-2S hitch pin hole to the center of the anti-rattle pin on top of the shank is 3-1/2".

The distance from the center of the hitch pin hole to the center of the anti-rattle pin on the Flash Silent 2-Ball Mount #DTSTBM6600-2S is approximately 1-3/4".

Sounds like you need a hitch pin lock like the part #e98881 that has a usable span of 3-5/8 inches. I attached a review video for this product for you to check out as well.

The best hitch lock option we have available to the length you are needing is our etrailer.com Trailer Hitch Receiver Lock #e98881. This extra long lock is designed to fit 2 inch and 2-1/2 inch trailer hitch receivers. It has a usable span of 3-5/8…

When looking at the weight capacities on ball mounts that feature a longer shank, such as the Curt Class I Drawbar #C45024 that you recently purchased, you can comfortably follow its listed weight rating without having to reduce the capacity based on…