Gen-Y Phantom Stacked Receivers Adjustable 2-Ball Mount Review Video

According to Gen-Y, the Phantom Adjustable 2-Ball Mount w/ Stacked Receivers #GY98XR is not rated for use with a pintle hitch. If you want to use a pintle hitch you will need the regular Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers. Although…

There is not an exact set minimum tongue weight for the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" part #C45949-22516 however it is not going to be very effective on a light weight trailer. We have asked Curt before about…

If you're going to tow anything at highway speeds for any distance, It really is important that you get the drop of the ball mount within an inch or so of level, or you'll get trailer sway which isn't super fun. I'll link to an…

I have attached for you below a photo with the requested measurements of the Roadmaster Dual Hitch Receiver Adapter 10" Rise/Drop part #RM-077-10.

The Roadmaster Dual Hitch Receiver Adapters like part #RM-077-4 can be used for both a bike rack and cargo carrier and you can also use them inverted (rise/drop position). The Roadmaster Dual Hitch Receiver Adapters are also offered in a few other…

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

Each bulb should have a power wire and a ground wire. As you can see in the diagram I provided, one lead of the resistor is tapped into the power wire, and the other lead of the resistor can either ground to the vehicle or tap into the ground wire…

I reached out to Furrion for clarification and found that neither of the HDMI inputs on the Furrion RV Soundbar w/ Bluetooth #FSB2N25MCBL support ARC (Audio Return Channel). The only way for sound to work through this soundbar is with RCA. The HDMI…

I would be happy to clear things up for you! The correct trailer wiring harness for your 2022 Chevy Equinox without the tow package will depend on which trim model it is. If your Equinox is the Premier model then you will need to go with the Tekonsha…

Sounds like you are looking for the Hitch Adapter part #MPG544. This is a dual hitch adapter that has a lower hitch opening that has a 6 inch drop like you'd need.

The weight capacity of the Malone Dual Hitch Extender, part #MPG544, is 4000 lbs and 400 lbs for tongue weight. Using this extender reduces the towing weight capacity of the hitch on your vehicle by 50 percent. If the hitch that is installed on your…

Since your hitch is rated for 4000lbs and you're using 3900 lbs for hauling your Jeep and hauling 100lbs of bikes, cutting your weight capacity in half when using a dual hitch extender #MPG544 will send you over the capacity. With any extender…