Curt Rebellion XD Shock Absorbing Adjustable Ball Mount Review Video

The TireMinder i10 TPMS #TM38FR refreshes every 6 seconds. You will get a visual and audible alert when the monitor receives the signal from your tire sensor is either below your pressure or the temperature exceeds the maximum setting.

I can absolutely help you as there are a lot of standalone options, but we do have exactly what you are looking for, which are the following: - Curt Rebellion XD Shock Absorbing Adjustable Ball Mount with 2" and 2-5/16" Balls #C57UR…

The Curt Rebellion XD like part #C45949-2516 and the Gen-Y Torsion 2-Ball Mount #325-GH-1124 are the two most advanced cushioned ball mounts. As far as cushioning goes the Gen-Y is the winner as it has a design that allows for more cushioning…

Since you have such a light boat trailer I recommend the Curt Rebellion XD #C83WR. This will work better with the lighter amount of tongue weight that you have of 400lbs. The hitch will also be much easier to use for you as it weighs only 43lbs…

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls #C83WR is 8" from the bottom of the receiver shank to the bottom of the adjustable mount.

We don't offer a product like the EAZ Lift sway control adapter you mentioned, but if you don't care for the idea of attaching the ball to the trailer frame using screws, you could certainly have the ball/plate included with the #83660 kit…

Friction sway control units like the part #83660 require drilling into the frame of the trailer for installation. You would need to contact the manufacturer of your trailer to determine if they are okay with you doing that on your trailer. Most…

All of the friction sway control units like the Curt #17200 that you referenced require drilling into the trailer frame. We do have electric sway control units like the Tuson part #335TSC-1000 which uses sensors to detect trailer sway and apply the…

Yes, dielectric grease like the Dielectric Grease for Electrical Connectors #11755 can and should absolutely be used on electrical connectors like your 4-pin trailer connector. Dielectric grease does a great job of protecting your equipment from…

The Curt adjustable ball mount part #C99NR that you referenced weighs 36 lbs.

The easiest way to tell the difference between the 2007 Chevy Silverado Classic and New Body Style is the tail gate or the tail lights. The new body style will have a large Chevy bow tie emblem in the center of the tail gate. It will also have red…

The Curt Adjustable 2-Ball Mount #C99NR uses Pins #C56NR which are 3/4" in diameter and have a usable length of 3-3/4". You will need the InfiniteRule Lock #IR36FR which is also 3/4" in diameter with a 3-7/8" span to lock the…