Fulton Round Snap-Ring Swivel Marine Jack Review Video

For your replacement swivel jack, I recommend you use a snap ring style jack like the Fulton Round, Snap-Ring Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,200 lbs #FTJ12000101 along with your 2 bolt assembly. I believe this will…

If the jack is stuck in the fully extended or retracted position, it's likely that the jack has been over extended which jams the internal screw into the nut. When this occurs, the best bet would be to replace the jack. The Fulton #FXP10…

If you give me the tapered spindle measurements like in the attached photo, I can help you get the replacement hubs you need. I need the measurements at letter B where the seal sits, letter C where the inner bearing rides, and letter D where the…

Yes, the Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers #EZ-JACK that you referenced can easily still work on your trailer that has the tires only 3 inches apart. The 3 inch distance you have now is pretty common for tandem axle trailers…

Thank you for the picture. That kayak carrying device certainly does look cumbersome. Quite the interesting contraption. While generally we do not recommend modifying products like this, but I am happy to help if I can. With the bar being only…

The Fulton Round Snap-Ring Swivel Marine Jack part #FTJ12000101 has the same 2.5" snap ring dimension and will work out for you as a direct replacement. Check out the attached photo showing the measurements.

I could not find anything specific to that part number, and Shelby is long out of business but for a bolt-on swivel jack there are a couple of options that will work for you, so long as you have a 3" x 3", 3" x 4", or 3" x…

We have a few wheel locks that will work for you. The etrailer Trailer Wheel Lock #288-02020 that works for tires up to 10 1/2" wide. Another option is the CLUB Tire Claw XL #WI491 that is designed to fit tires up to 12" wide.

While we do have some great U.S.A.-made boat trailer jacks, the etrailer Round Swivel Marine Jack #MJ-1500B-DWL is manufactured in China. However, for a super close U.S.A.-made model, I recommend the Dutton-Lainson Swivel Marine Jack #DL67MR. This…

You can find the cover for the Fulton F2 jack gearbox here: Replacement Gearbox Cover #F500135. But if you are referring to the gearbox itself then that is unfortunately not available. I recommend looking into a new jack such as Fulton Bolt-Thru…

The etrailer Round Swivel Marine Jack w/ Dual Wheel - Bolt On - Zinc - Sidewind - 10-3/8" Travel - 1.5K item #MJ-1500B-DWL you were looking at has an inner tube diameter of 2". The outer tube diameter is 2-1/4". I have linked an…

Yes, the Fulton Bolt-Thru Swivel Marine Jack part #F27CR can be used on the side of an a-frame trailer. It will work great if you are securing the jack for supporting the trailer or just maneuvering it around via the wheels. The Fulton Bolt-Thru…