etrailer.com Chrome Trailer Hitch Receiver Lock Review Video

The RockyMounts 1-1/4" to 2" Hitch Adapter Sleeve for MonoRail Bike Rack #RKY54FR will almost certainly not work. I do not know what Swagman bike rack you have, but the adapter sleeves for bike rack shanks are typically pretty specific to…

I checked with our vendors and as of 10/1/23 the only custom fit 4-flat harness available for the 2024 Hyundai Tucson is the Curt T-Connector Vehicle Wiring Harness item #CU94FR but it only works if you have the tow package. If you do not have the…

The only class of hitch available for a 2010 Nissan Altima is a Class I hitch like the Draw-Tite, #24796. Class I hitches have a 1-1/4 inch receiver opening and a 200 pound or less tongue weight capacity. After checking the owner's manual for the…

The tab on the inside of the trailer hitch receiver for your 2008 Nissan Altima is meant to ensure that the user only uses Class I rated accessories in the hitch. As you can see in the attached photo. This is more of a safety precaution as Class I…

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

The Trailer Hitch Adapter part #e93YR can be used to raise a bike rack off the ground more to provide greater ground clearance. It will as you said reduce the hitch's capacity by 50% so as long as the weight of the bike rack and bike is under…

The best option we have for you to help with raising the rack would be with the Trailer Hitch Adapter part #e93YR. In order to use this you'd need to use the included adapter sleeve with your bike rack to fit the 2" hitch size. There…

In order to convert the 4-way on your 2023 Toyota Highlander Hybrid into a 7-way you'll need to use the 4 to 7-Way with 4-Way Adapter part #ETBC7L. This will then pair well with the Curt Echo Wireless Trailer Brake Controller part #C51180 which…

Instead of extending the black wire from the 7-Way plug in 7-way upgrade kit part #ETBC7 to the battery under the hood you would extend the black wire from the plug to the positive side of the battery in the back of the vehicle with a 40 amp circuit…

The Roadmaster High-Low Adapter for Tow Bars #RM-076 that you referenced would be perfectly for what you need. It will give you the 6 inches of drop and will also extend the ball mount out an additional 10-1/4 inches.

The length of the lower bar, pin hole to pin hole, is 10 inches.

If you wanted to remove some of the wheel trays of the Hollywood Racks Destination bike rack part #HR4000 you certainly could as like you said they are all bolted on independently.