Brophy Hitch Adapters - Hitch Expander - HT5R Review Video

Hey Richard, for your 2011 Toyota Camry LE V6 with the dual exhaust, I actually recommend the Draw-Tite Hitch #36416. This hitch was designed with the dual exhaust models in mind, and we have had many customers report back to us that it will fit…

I recommend the Curt Trailer Hitch Receiver #C12118 on your 2015 Kia Cadenza. This hitch has a tongue weight rating of 350lbs and 3,500lb trailer rating. You will want to ensure that you do not exceed the weight ratings given by the manufacturer…

For your 2014 Kia Cadenza, the Curt Trailer Hitch Receiver Class II - 1-1/4", #C12118 is a confirmed fit. The hitch will come with all the installation hardware you need as well as installation instructions. For any non-trailer load like a…

Yes, you can use a hitch adapter like the 1-1/4 Inch to 2 Inch, #HTAD, in the Curt Trailer Hitch Receiver, #C11158, to allow you to use the cargo carrier/basket for the 2 inch hitch. In addition to the adapter you will need hitch pin and clip #PC2…

The best option I have for you is to use the MaxxTow Ball Mount part #MT70066 which will raise the cargo carrier another 6" off the ground. The reason I recommend this option over other adapters is because it will not reduce your tongue weight…

The best option we have for you to help with raising the rack would be with the Trailer Hitch Adapter part #e93YR. In order to use this you'd need to use the included adapter sleeve with your bike rack to fit the 2" hitch size. There…

The item you selected, Draw-Tite Class 1 Sportframe Trailer Hitch, part #24692 is not compatible with a 2 inch adapter or reducer, part #80303. Part #24692, is a Class 1 hitch and is designed to not to work with a 2 inch adapters, because of the…

The Trailer Hitch Adapter part #e93YR is designed for class I and class II trailer hitch receivers. I have also attached for you below a few measurements we have listed, if you need one you don't see just let me know what that is and I'll be…

I reached out to my contact at Curt to make sure I give you the most accurate measurement. The wall thickness on the Curt Solid Steel 1-1/4" Hitch Bar with Raw Finish - 24" Long, #C49524, is 0.221 inches.

I checked with Yakima and for the Exo Swingbase part #Y34VR the correct replacement hitch pin bolt is the part #Y52FR.

We do have the Trailer Hitch Adapter #e93YR. This will fit into a 1-1/4" receiver and allow you to fit a 2" hitch accessory. It will give you a 5" rise and you will need to reduce your receiver's tongue weight capacity by 50% when…

The 2 inch hitch size is used only on higher capacity vehicles like SUVs, trucks, and sometimes vans whereas lighter duty vehicles like your 2011 Hyundai Genesis only have the smaller 1-1/4 inch hitch size available like the Curt #C11086 for if you…