Brophy Long Shank Hitch Ball Review Video

I do have one recommendation as your 2022 Land Rover Discovery is not recommended for using a weight and sway distribution hitch. For your receiver it is important to determine how much drop or rise there is between your Land Rover and your 2021…

The Curt Class III Trailer Hitch Receiver #13138 is certainly the hitch I recommend for your 2004 Ford Ranger so that the spare tire can remain stored under the vehicle. To choose the correct ball mount for your truck and trailer, it is best to…

I have attached a photo for you below that shows which way the s-hooks should face when attached to the safety chain loops on a trailer hitch. The photo example is using the Curt Single Hook, Coiled Safety Cables with S-Hooks part #C80176 for…

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I attached…

Yes, you can absolutely use an aluminum ball mount with a stainless steel hitch ball without worry of the ball mount corroding. In fact, there are no aluminum hitch balls so manufacturers suggest the use of stainless steel as it is going to be the…

It is perfectly safe to use a ball mount like the #C45100 you were looking at with your 2003 Honda Odyssey. This ball mount has a gross towing weight of 3,500 lbs in the 6-1/4" rise position so it works for any trailer as long as it does not…

Technically any additional length is going to increase leverage on the trailer hitch. But there isn't an exact standard length ball mount so going super technical on how much the force multiplied when the ball mount is beyond a certain length is…

Brophy hitch ball #SC23-C is made overseas. For a stainless steel option that is made in the US you would have to go to an interchangeable set, #903B. I have linked a video review of this set for you.

You will need a 1-1/2" wrench like part #C20001 in order to install the nut on the 2" Hitch Ball part #63845. A 1-7/8" wrench would be much too large.

The 2" Hitch Ball part #SC23-C is constructed entirely of stainless steel and has a polished finished. It works with ball mounts that accept a 1" diameter shank and trailer couplers that accept a 2" diameter hitch ball. I have attached…

We do have some anti-rattle locking pins that will fit the Convert-A-Ball Cushioned Ball Mount #AMSC4, but the Lets Go Aero Anti-Rattle Device and Lock #63232 is not compatible as it needs a hollow shank to fit properly. You can purchase separate…

Yes, on a ball mount that can be used in both the rise or drop position such as #AMSC4 that you referenced, the capacity remains the same. For this ball mount it is rated for 10,000 pounds gross trailer weight and 2,000 pounds tongue weight. I have…