Review of Fulton Trailer Hitch Ball Mount - 2 Aluminum Ball Mount - F97CR Video

I do have one recommendation as your 2022 Land Rover Discovery is not recommended for using a weight and sway distribution hitch. For your receiver it is important to determine how much drop or rise there is between your Land Rover and your 2021…

Having a ball mount that is longer should not be an issue. It actually can provide more clearance when turning. The standard for a 2 inch ball mount is around 8 to 8-1/2 inches from the center of the hitch pin hole to the center of the ball hole. We…

Yes, there will be an effect on towing capacity when using a hitch extender. The Hitch Extender For 2" Trailer Hitch Receiver part #HE06 for example that you referenced will cut your towing capacity in half, so 1,750 lbs. This will also be the…

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I attached…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

From the base of the #C40047 up to the top of the ball measures 4.091 inches. This is about 1-3/8 inches taller than a standard ball.

Yes, you can use the Reese Friction Sway control part #83660 without a weight distribution system. You would just need to use the tab part #RP26003 on the ball mount as well.

You've got good instincts. I recommend going with a ball mount that has a 2 inch rise for the exact reason you mentioned, the truck will settle a bit with the tongue weight and any cargo weight. The ball mount we offer with a 2 inch rise is the…

The Curt ball mount part #C74WR weighs 4 lbs. There isn't an aluminum ball mount option that has a sway bar bracket. The closest option we have that has the sway control tab is the Curt #D320 which is steel. It weighs 7 lbs.

You can see all fixed 2-inch ball mounts by clicking on the linked page. The shortest of these is the Curt Ball Mount #C74WR. This aluminum ball mount measures 8-1/2-inches from the center of the hitch pin hole to the center of the ball hole. It…

If the trailer has an A-frame tongue on it, you should be in good shape unless you need to make a very tight 90 degree turn. We offer several different ball mounts in extended lengths. The longest ball mounts typically have a lower weight capacity.…

If you have a Diversi-Tech Ball Mount with inoperable lock cylinder they will need to be replaced using the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts part #DTLBM02RK. This would be the most cost effective way to get…