Customers compare BWTS10049B to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The B&W Tow & Stow 3-Ball Mount #BWTS10049B measures approximately 5-1/4" from the top of the receiver to the top of the 2" ball when in the lowest position. Keep in mind that drop is measured from the top of the…
view full answer...In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along…
view full answer...The interior lights of your enclosed trailer are likely connected to the 12V (Auxiliary) power pin on the 7-Way of your trailer. You can verify this by applying 12V power from a separate battery to this pin and seeing if that supplies power to your…
view full answer...The Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels, #ORJW350D has an overall length of 18".
view full answer...Your ST205/75R15 trailer tire features a Load Range C which, according to the tires we have available in this size such as the Provider #TTWTRTM2057515C, gives it a maximum load of 1,820 pounds at 50 psi. If you can tell me what specific brand tire…
view full answer...Determining how to get the correct rise or drop is actually pretty simple and only requires two measurements. If you get the largest rise and drop you could wind up with more ball mount than necessary. In order to choose the correct ball mount, there…
view full answer...The B&W Tow and Stow ball mount #BWTS10049B will have some great features. You can stow the mounting platform that has the 3 hitch balls (1-7/8, 2, and 2-5/16 inch) underneath your vehicle. This is nice because you will eliminate the possibility…
view full answer...Due how tall the rear of your 2018 Ram 2500 would be I would go with the 7 inch drop version of the B and W Tow and Stow part #BWTS10049B as you'll need the extra range.
view full answer...Yes, you can run the switch power wire to a clearance light but the trailer would have to be connected to the vehicle with the running lights on for the interior lights to have power. Aluminum does not offer the best ground so if the lights do not…
view full answer...The Hopkins Plug-in Simple Brake Wiring Adapter #HM47795 should have the red wire run to the pin right next to the blue wire closest to the clip side of the connector. See the picture I attached. The blue wire you found under the hood of your truck…
view full answer...The Tuson Asymmetric Sway Control #335TSC-1000 will allow you to have sway control on your trailer with electric brakes while towing with the B&W Tow & Stow 3-Ball Mount #BWTS10049B. This ball mount was not designed to be used with a friction…
view full answer...For safe and comfortable towing, a trailer should always be as level as possible. In order to determine which B&W Tow & Stow Ball Mount will work best on your 2015 GMC 2500HD with 20 inch rims, you will need to measure your hitch height from…
view full answer...