Titan Brake Actuator T2374600 Review Video

We do have the Titan master cylinder replacement part #DX66FR which has the number 23744 stamped on the side of it. See attached picture. A lock out solenoid would attach directly to the back of the master cylinder without an adapter. If you are in…

Finding parts for a trailer that old can certainly be tricky. According to what I can find online, the national 6362 seal has an ID of 1.687" and an OD of 2.627". It looks like they are still out there in circulation, but…

I attached the exploded parts diagram for the Titan Model 10 actuators. To access the shock you will need to remove the brake master cylinder so that you can access everything from the rear of the actuator. You will basically just need to access…

I believe that you have a Titan Model 10 actuator based off of the diagram that you are referring to which I have attached below. I contacted Dexter (they now own the Titan products) and the replacement shock part #T1242600 is not attached to the…

For your replacement Dexter hydraulic brake assemblies, you will want the Dexter Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies #23-312-313. These will work very well with your existing hub/drum assemblies.

To test your shock, you can extend and retract it manually but it will take some force as there should be resistance. It should measure 6 inches from center to center when retracted and 8-1/16 inches when extended. If it is not working properly…

If you look at the wheel cylinder of the brake assemblies part #23-399 and #23-398 you'll see the letters L and R stamped on them. The R means right hand side and L means left. I attached a picture that points out the letter. Right side means…

The etrailer.com Hydraulic Trailer Brake Kit #AKUBRK-35 referenced in your question has a 4 bolt mounting flange pattern, as you mentioned. The mounting hole dimensions are 4 inches diagonally across and 2-7/8 inches left to right. This is the…

Your ST205/75R15 trailer tire features a Load Range C which, according to the tires we have available in this size such as the Provider #TTWTRTM2057515C, gives it a maximum load of 1,820 pounds at 50 psi. If you can tell me what specific brand tire…

The Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators part #T4749501042 is designed for Titan Model 10 and 20 Surge Brake Actuators for disc brakes. If you have drum brakes you'll need to use the part #T2374600…

Thanks for the photos of your trailer's actuator! They were very helpful in answering your questions. Based on the photos, it appears that you have a Titan Model 10 Actuator #T1607500. For a Model 10 actuator, the #DX66FR that you referenced is…

To replace the shock in your Titan model 10 actuator you are going to basically need to disassemble the actuator so that you have access to the shocks. Instead of describing to you how it comes apart I thought it would be more helpful if you had an…