Titan Brake Actuator - Surge Brake Actuator - T2478100 Review Video

Yes, the Kodiak Hydraulic Brake Line Kit #15SI-BLKIT is compatible with the Titan/Dexter model 10 Surge Brake Actuators for Drum #T2478100 or Disc #T4750600 brake systems.

I am not aware of any Titan Surge Brake Actuators having an available manual lockout for them. It is possible to convert some of the Titan Zinc-Plated Brake Actuator #T2477600 to an electric lockout. To do this you will need the Solenoid Valve for…

For a replacement you need the Titan Zinc-Plated Brake Actuator #T2477600. This is the Titan Model 10 which is the same as the Dexter DX12.5 you currently have on your boat trailer.

Go ahead and email me back with the picture of what you have and I can see if we can help. Worst case scenario you'd have to replace the coupler.

The best trailer coupler lock for your Titan Model 10 Brake Actuator #T2478100 is the Blaylock EZ Lock Trailer Coupler Lock #BLTL-33-40D because it locks your actuator with a stainless steel padlock that has a hardened steel shackle and busting…

You are correct. Other than how they are made, the Demco Cast Head Coupler w/ Jack Hole - eZ-Latch - 2" Ball - A-Frame - Bolt-On - 10K #DM37ZR and the #DM14793-81 have the same ratings and will work the same. There is no pro or con to…

Personally I prefer the Demco Trailer Coupler #DM14976-52 with the composite handle over the Coupler #DM15791-81 with a metal handle. I feel it is easier to operate as it does not have the safety latch like you get on the metal handle. Since most…

Begin by removing the master cylinder cap and fill the reservoir to three quarters full with DOT-3 brake fluid. DO NOT allow brake fluid to contact painted surfaces since it will damage the finish. Wipe up any spills immediately and wash the area…

Yes, you can remove your weld-on coupler and install a new bolt-on coupler that fits a 2 inch ball. There is just a few things you need to do to before and when installing. You need to know what channel size and the weight capacity you will need for…

DOT5 brake fluid is what you'd want to use in the Dexter surge actuator part #DX89FR. If the breakaway pin was pulled it would be replaceable. The breakaway cable is replaceable.

Thanks for the photo. If the line/hose you are referring to is the one that goes from the caliper to the bracket on your torsion axle you will need to use the Hydraulic Flex Hose part #18018-SF.

We have a fit for 12x2 inch hubs or 12-1/4x2-1/2 inch hubs. The Dexter Electric Trailer Brake Kit - 12-1/4" - Left and Right Hand Assemblies - 7,200 lbs #23-428-429 is the only fit we have for the larger hubs and it has a 4 bolt versus 5 bolt…