Review of etrailer Trailer Leaf Spring Suspension - Dacromet Leaf Springs - e78SR Video

You are going to need 26" long leaf springs. We have our Standard #e94SR or the Rust Resistant #e88SR springs you can select from. Both of these are the correct 26" length you need and have a weight capacity of 3,000lbs per spring. Be sure…

The wheel and tire combos you mentioned would work great on your R-Pod. The part #AM39053 will look and work great and then the part #LHAW121 would work great as a spare. Since all 14 inch trailer wheels use the same bolt pattern as these we know…

This will need to be pieced together to build you an entire kit. First the Dexter Trailer Idler Hub Assembly #8-213-5UC1 will replace your current brake and hub assemblies on your 2010 Forest River Salem 336QBUD. This will let you remove the brake…

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

The SRE4000 is quite a big improvement over the CRE3000. The SRE4000 provides more suspension travel (4" Vs. 3"), greater road shock absorption, a longer warranty (3 Yrs. Vs. 2 Yrs.), and much more. We also offer the SRE4000 with an…

The hangers you currently have on your trailer are ones I have run into before. That being said, I spoke with MORryde and the #MR27ZR will still fit your trailer, but there is a modification that will need to be made. You’ll have to trim according to…

Since you need at least a 5k rated spring that is 25-1/4 inches in length (like the #PR4) you would actually want the part #e34SR which is a 6k rated spring. A little more capacity than needed is better than a little less so this would be your best…

I do have a solution for you, however when I spoke with my contact at Lippert they said that your axle is rated for 5,200 lbs and the highest rated standard axles that we have are rated for 3,500 lbs. The alternative solution that we have is the…

With your axle leaf springs measuring out to 25-1/4 inches long I recommend the 4-Leaf Double-Eye Spring #e28SR for your 3,500 pound axle. This spring has a 5,000 pound weight capacity so it will be a little stiffer for you. The spring has a sturdy…

The typical springs for the AL-KO 4,400 axles are one of two lengths. If you have the 25-1/4 inch length, then you will want the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles #e28SR, but if you have the 26 inch springs, you will want the 6-Leaf…

I have a set of leaf springs for your Lippert Axle they are 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long item #e27SR. You will want to measure the spacing on your mounting brackets to confirm compatibility. The length from…

You are correct. The Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs #K71-448-00 you were looking at is 4" tall meaning it slightly will lift your trailer. These equalizers are slightly shorter at…