Installing a MORryde MR27ZR on a 2020 Grand Design With Oddly Shaped Hangers
Question:
I have 35” from the center of each wheel so I know which CRE3000 I need but my hanger is different then most trailers. I will include pics so you can see what I’m talking about. MORryde fit sheet says hanger must be 3” wide. Not sure if I can still use this or if there is another option they have for me? Is there another equalizer that would work for my set up? The stock equalizer appears to be about 7.5” long between the holes but it was hard to hold the tape measure and take pics at the same time. Also the equalizers I have on there now have #’s stamped on the back, not sure if that helps with anything?
asked by: Jason H
Expert Reply:
The hangers you currently have on your trailer are ones I have run into before. That being said, I spoke with MORryde and the # MR27ZR will still fit your trailer, but there is a modification that will need to be made. You’ll have to trim according to the included diagram.
The top of the equalizer pivots on the bolt, which is why this clearance is necessary. The case of the # MR27ZR also has flanges on it to add additional strength. These flanges need clearance when pivoting around the hanger and this frame hanger set up is an exception. It doesn’t get you 3 inches of width as you can’t add material to the frame hanger, but MORryde said it can still work with less than 3 inches of width. It just needs to match the frame hanger as shown below that is marked up. You will be removing the section of material so that the parts can move properly.
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Trailer Leaf Spring Suspension
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 8 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Shop: Road Armor Shock Absorbing Equalizer Kit - Tandem Axle - Qty 2
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
- Video: Review of MORryde Trailer Leaf Spring Suspension - Equalizers - MR27ZR
- Search Results: morryde
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Shop: Suspension Enhancement
- Video: MORryde Tandem Axle Trailer Rubber Equalizers Manufacturer Demo
- Search Results: cre3000
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR46ZR
- Search Results: sumosprings
- Search Results: morryde cre3000
- Q&A: Will MORryde Rubber Equalizers MR27ZR Raise A Trailer?
- Video: Review of MORryde Trailer Leaf Spring Suspension - Equalizers - MR87ZR
- Video: MORryde Rubber Equalizers Installation - 2021 Grand Design Transcend Xplor Travel Trailer
- Q&A: Recommended MORryde Pin Box to Replace a Rhino Box
- Search Results: dexter ez flex
- Search Results: leaf spring suspension
- Video: Review of MORryde Trailer Leaf Spring Suspension - Shackle Links - MR58ZR
- Video: MORryde Tandem Axle Trailer Rubber Equalizers Installation - 2009 Keystone Montana Mountaineer Fifth
- Search Results: road armor suspension
- Q&A: MORryde Equalizer Upgrade for 2019 Jayco 321RLTS 5th wheel
- Article: Elevate Your RV Travel Experience with Harvest Hosts
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: How To Determine Correct Wet Bolt/Shackle Upgrade Kit For Tandem Axle Trailer
- Q&A: Should MORryde Equalizer Kit MR87ZR Or MR27ZR Be Used With 35" Axle Spacing?
on Trailer Leaf Spring Suspension
