Review of etrailer 5 Leaf Double Eye Spring - e34SR Video

Anthony, unfortunately we don't have a master list of all the fits and non-fits for the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles #e34SR but you can easily measure the leaf spring that you're replacing to verify. If your…

The amount of leaves won't make a huge difference on whether they will flatten out or not as what really matters is the capacity of the spring relative to the axle and trailer weight. I would go with at least ta 4,400 lb leaf spring or…

What we have that matches what you listed the best is the leaf spring part #e34SR which is a 25-1/4 inch long spring for 6,000 lb axles like you need. Only difference is this is a 5 leaf spring and you said yours was a 4. Aside from that this would…

The Moryde wet bolts #MR52HR use a standard 1/4"-28 thread for the zerk fittings.

You said "about" 25 inches in length so I'll give you a couple options for what might work depending on the exact length you have, and if you want to go to a higher-rated, 7k leaf spring. Also, you'll want your replacement springs…

I believe you are referencing our 6k double-eye leaf springs, the 4-leaf, 25-1/8" long #e47SR and 5-leaf, 25-1/4" long #e34SR. The number of leaves won't make a huge difference, but fewer leaves can give you a slightly softer ride. So…

Since you need at least a 5k rated spring that is 25-1/4 inches in length (like the #PR4) you would actually want the part #e34SR which is a 6k rated spring. A little more capacity than needed is better than a little less so this would be your best…

Though upgrading to the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles #e34SR will not compromise any of the suspension components, it will affect the ride quality of the trailer. As your 2018 Keystone Hideout has a fully loaded weight of 9,665…

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

With your axle leaf springs measuring out to 25-1/4 inches long I recommend the 4-Leaf Double-Eye Spring #e28SR for your 3,500 pound axle. This spring has a 5,000 pound weight capacity so it will be a little stiffer for you. The spring has a sturdy…

You can measure your leaf spring (eye to eye) while it is still installed on the trailer, but first you'll want to jack up the trailer so that the leaf spring is completely unloaded. Also, it is possible that your springs are worn and stretched…

The typical springs for the AL-KO 4,400 axles are one of two lengths. If you have the 25-1/4 inch length, then you will want the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles #e28SR, but if you have the 26 inch springs, you will want the 6-Leaf…