Review of etrailer Trailer Leaf Spring Suspension - 4 Leaf Slipper Open Eye Dacromet 4300 lb - e33SR Video

The Slipper Spring #e33SR referenced in your question is indeed the closest option we have available for a slipper spring that matches the dimensions on your trailer. Slipper springs come in 1-3/4 inch, 2 inch, 2-1/2 inch, and 3 inch widths, so you…

For the spring eye you would use the Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long #166079, but slipper springs don't have the second spring eye, so a bolt is not used on the back end. You can also use a wet bolt like…

The width of the Slipper Spring part #e33SR that you referenced is for sure 1-3/4 inches.

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.

Sounds like what you are in need of is a single axle hanger kit for the leaf spring part #e33SR that you mentioned. For that you'd only need the #APS3SE and you'd be set. This gives you the hangers for the front and rear for the spring as…

I'd be happy to help you find new leaf springs for your 2020 Tracker Targa V18 Tandem Axle Trailer, but there's no database that says what length leaf springs you have or what capacity they need to be. The first thing you'll need to do is…

We do not have a direct 27 inch slipper spring but depending on how old your springs are they could have flattened out a bit. The 4-Leaf Slipper Spring w/ Open Eye End for 4,300-pound Trailer Axles #e24SR has a spring capacity of 2,150 pounds and has…

In order to find the correct replacement slipper spring you will need the length, width, and the capacity. The leaf count does not indicate capacity and is not important when determining a replacement. This information would also make a difference in…

Trailer leaf springs come in many different lengths and some may have the same capacity but different measurements and/or number of leaves. This is due to different configurations of trailers, axle spacing, and tire size. Ideally you would use the…

Your trailer uses an open eye leaf spring like #e24SR. Over time as the leaf spring softens the gap you are seeing will get bigger. As long as the leaf spring is not falling off the hanger when you raise the trailer weight off the axle they do not…

The bushings of the 4-Leaf Spring part #e33SR have a 9/16 hole diameter. If you are looking for a replacement bushing you would want the part #TRBU11561. This bushing has a 9/16 inner diameter and an outer diameter of 1.02 inches.