What Size Bushings Does the Trailer Slipper Spring Part # e33SR Use
Question:
What r the bushings these springs use SP-264275
asked by: Juan V
0
Expert Reply:
The bushings of the 4-Leaf Spring part # e33SR have a 9/16 hole diameter.
If you are looking for a replacement bushing you would want the part # TRBU11561. This bushing has a 9/16 inner diameter and an outer diameter of 1.02 inches.
expert reply by:
Jameson C
0
Products Referenced in This Question
Nylon Bushing - 9/16" Inner Diameter, 1.024" Outer Diameter - 1-3/4" Long
- Trailer Suspension Parts
- Bushings
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 9/16 Inch ID x 1-1/25 Inch OD
- 1-3/4 Inch Long
- TruRyde
more information >
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Trailer Leaf Springs
- Slipper Springs
- Open Eye
- 4300 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26-1/4 Inch Long
- Dacromet
- etrailer
more information >
Continue Researching
- Q&A: Replacement Slipper Springs for EZ Loader Trailer with 26-1/4 Inch Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: How To Convert Trailer With Slipper Springs To Double Eye Springs
- Q&A: Installation of Slipper Spring with Open Eye End
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Does Trailer Wheel Hub/Brake Drum Need to Be Replaced if Inside Surface is Grooved
- Q&A: Is Bushing Required on Open Eye End of Slipper Spring
- Article: Trailer Wiring Diagrams
- Q&A: Will 14" Diameter Trailer Wheels fit On The DeeMaxx Disc Brake Kit # DE66YR?
- Q&A: Comparing PVC, TPR, and Polyurethane Boat Rollers
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: How to Tell the Weight Rating of a Trailer Axle