How to Determine the Size of a Trailer Hub Assembly for Replacement
Question:
The axle nut appears to be 1 inch how do I know what size hub to buy ? its 5 lug and has 13 inch tires on it ?
asked by: John C
Expert Reply:
To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose # 8-258-5UC1. If the inner bearings are marked L44643, you will need # 8-258BTUC1. If you do not have the old bearings, you need to measure the inner bearing surface on the spindle to determine if the 1.063 inch dimension or 1.00 inch dimension will be needed to accept the bearing. You can also measure the inner seal mounting surface and those dimensions would be 1.5 inches and 1.249 inches respectively. I have provided links for these two products and this will help with dimensions and pictures. Remember to make sure the bolt pattern is the same. You can use the measurement guide for this at the bottom of either hub assembly page.
Here are the specific measurements for each hub.
Hub 8-258-5UC1
bearing # L44649
Inner bearing dimension is 1.063 inches
Inner seal dimension is 1.500 inches
Hub 8-258BTUC1
bearing #L44643
Inner bearing dimension is 1.00 inches
Inner seal dimension is 1.249 inches
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Search Results: l44649
- Shop: Trailer Hitch
- Search Results: hubs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: surge brake actuator
- Search Results: bearing buddy
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Search Results: trailer tires and wheels
- Q&A: How To Determine the Correct Replacement Trailer Hub Assembly
- Search Results: kenda karrier
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Search Results: cotter pin
- Q&A: How to Determine the Correct Replacement Hubs for a Boat Trailer
- Video: Optronics Mini LED Side Marker Light Installation
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-6-EZ-K
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
Joe F.
5/16/2020
I need to purchase two replacement hubs (hopefully pregreased) for a 1989 Coleman Shenandoah pop up camper (5 bolt wheel). Unfortunately, the camper is located in the mountains of Colorado over a 100 miles away from my residence and I cannot easily measure the size of the axle. Do you sell hubs what would fit the 1989 Coleman Shenandoah camper? If so, could you direct me to the specific parts. Thank you.