Valterra RV Sewer - Waste Valves - T38 Review Video

We can help you with that. You can use the Bristol RV Waste Valve #34466N3AR for your 2014 Forest River Wildwood X-lite 235BH. You would then want some LaSalle Bristol ABS Solvent Cement #3447530889 for installation.

I went out to the warehouse to take a measurement of the 3" diameter pipe on the Double RV Waste Valves #T38C and found that without the cap it measured 5" in length, as you can see in the accompanying photo I've added for you. I have…

To attach the Valterra Eccentric Tank Reducer #T1041-1 to the rest of the plumbing on the RV and prevent leaks use the Valterra ABS Solvent Cement #A05-0303. It was made for exactly this purpose!

The Valterra Eccentric Tank Reducer, part #T1041-1, is installed with cement. When you reinstall the new one use #A05-0303. The cement is permanent so you're not going to be able to break it up. Instead you need to cut the pipes after removing…

I have a solution for you, but we don't have access to information that tells us exactly what pipes are found on particular coaches. The #TR38A has a spigot for the black water pipe and a hub for the grey water pipe, so if your coach has those…

Thanks for the picture of what you have based on that you are in need of the Double RV Waste Valves - Sewer Wye #T38C.

Yes, when replacing sewer parts that have been installed with ABS Solvent Cement like part #A05-0303 you will need to cut the pipe right where the old valve is installed so you can install the Valterra Waste Valves #TR38. If you think this will…

You should be able to tell which Valterra Double RV Waste Valves you need by inspecting your current connection points. The one end with the lugs on it is the same on all 3 parts so you simply need to determine if you need hubs, spigots, or a…

Dual waste valves, such as the Valterra #TR38A, are nearly generic by nature. This one has the standard 1-1/2" gray water gate and standard 3" gate, and has a "Y" shape. You should also look at the Bristol #34466ND13AAR Double…

You should be able to tell which Valterra Double RV Waste Valves you need by inspecting your current connection points. The one end with the lugs on it is the same on all 3 parts so you simply need to determine if you need hubs, spigots, or a…

The difference between all three of the part numbers is the difference between a "hub" and a "spigot." The hubs fit over the spigots so it's basically the style of fitting you need. The part #TR38 has a hub and a hub for bot…

I went out to the warehouse to take some measurements of Curt trailer hitch #C14082. I made a picture showing the measurements for you. The bolt holes, starting from the one furthest forward on the vehicle, measures 2-3/4 inches to the center of the…