Review of Valterra RV Sewer Hose Fittings - Sewer Adapters - Sewer Couplers and Nipples - T1041-1 Video

Yes! To replace the mounting hardware for your White Dometic 310 Part-Timer RV Toilet #DOM57FR you need the 2-Bolt Mounting Kit #DOM43FR.

The adapter you need is the Valterra part #T1041-1 that you referenced as it fits your configuration needs. The 3 inch portion fits into the tank and then the 1-1/2 inch portion fits over the elbow fitting like you need. Rubber cement is basically…

The Dometic Part-Timer RV Toilet - Standard Height - Round Bowl - Slow Close Lid - White Ceramic #DOM57FR comes with the new mounting hardware and new seal so there is nothing else required for installation. Your current water line should connect…

To attach the Valterra Eccentric Tank Reducer #T1041-1 to the rest of the plumbing on the RV and prevent leaks use the Valterra ABS Solvent Cement #A05-0303. It was made for exactly this purpose!

The Valterra Eccentric Tank Reducer, part #T1041-1, is installed with cement. When you reinstall the new one use #A05-0303. The cement is permanent so you're not going to be able to break it up. Instead you need to cut the pipes after removing…

The difference between the three Valterra Double RV Waste Valves referenced in your question has to do with their fittings, specifically their use of hubs or spigots. Basically a spigot (also referred to as the "male" fitting) will go…

To widen your 1-1/2" pipe to 3" using the Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub #T1041-1 you would first need the Valterra DWV Adapter for RV Sewer System - ABS Plastic - 1-1/2" Hub to FPT…

The Projected Male Slip Fitting part #372216-A-MS-A typically installs into the opening on the black water tank and then lets you attach a 3" diameter sewer pipe.

The closest match that we have is the Valterra #T1035-2 RV Sewer Elbow. The internal measurement on the spigot end is 3" and is meant for a glued connection rather than a push together connection with an o-ring.

I have a solution for you, but we don't have access to information that tells us exactly what pipes are found on particular coaches. The #TR38A has a spigot for the black water pipe and a hub for the grey water pipe, so if your coach has those…

To install the Valterra Cable with Valve Handle #TC72PB you will need to simply follow the instructions that are included in the packaging: Remove the locknut from the cable housing assembly. Feed the cable through the mounting bracket or hold in the…

The storage cover that is the best fit for your Forest River Rockwood HW296 pop-up camper is from Adco, and is the following part number: - Adco SFS AquaShed RV Cover for Pop-Up Camper #290-12294 The AquaShed #290-12294 is for pop-ups with boxes…