Review of Reese Weight Distribution - Weight Distribution - RP66021 Video

Thanks for the photo, and you are correct, you do indeed have a Dexter 7,000 lb axle, and are also correct regarding the shoes and magnets for Dexter 7k electric brakes, the Replacement Shoe #DX28FR and Replacement Magnet #BP01-225. That said,…

I agree that calling the #58437 thread forming is a little misleading since it's recommended that you drill holes in the frame and use the rivet nuts part #RP58507. Thread forming bolts typically have more of a drill bit on the end of the bolt…

I reached out to my contact at Reese and you are correct that you will need new rivet nuts #RP58507 to install your Reese Dual Cam Weight Sway Control #RP26002 on your new trailer. He mentioned that the replacement thread forming screws #58437 can be…

The product weight of the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers #325-GH-1225 is 87 lbs. This hitch mount is awesome due to all the extra things you can use with it. It has 5 stacked 2" hitch receivers that can accommodate almost any…

Sounds like you are looking for the thread forming screws that hold the Reese Dual Cam part #RP26002 to the trailer frame which for that you'd need the part #58437 and you'd be set.

The etrailer #CA-5400-B weld-on coupler you were looking at would be a great replacement for your current Parker Performance A-frame coupler. This coupler has a 2-5/16 inch ball and a weight capacity of 14,000lbs. I have linked this product to this…

9 inches of ground clearance will be adequate for most situations. If you need the drop that the part #17120 provides to tow your trailer level that would be the priority over ground clearance. This shank does not drop down too far so there…

There are some of the older gold arms available as replacement parts. I recommend the Replacement Cam Arm Assembly for Reese Dual Cam Classic - Gold #RP58460 for your current system if you need the replacement bracket the arm fits into. The…

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76046-SK is a great option for a 2019 Chrysler Pacifica Hybrid. It features a bolt-on design, has a hidden crosstube, and an integrated trailer connector mounting bracket if needed. In regards to…

Thanks for the picture! We do have a replacement option for you. You will want the Replacement Heavy Duty Snap-Up Bracket for Reese Weight Distribution Systems item #58392. This works with Reese weight distribution systems with a tongue weight…

The higher capacity Reese WD systems we carry do have the heavy duty brackets part #58392. For example the Reese WD System part #RP66131 has the heavy duty brackets. To answer your other question, yes the #58392 does include the set screw and safety…