Review of Dexter Axle Trailer Brake Parts - Replacement Shoe and Lining Kit - DX28FR Video

It sounds like you need the Dexter Wheel Bolt #7-262. This bolt measures 2-11/16" long from the base of the head to the threaded end. It has the same 1/2"-20 thread pitch and the 0.54" knurled end. The Studs #RG03-080 you found have…

The Dexter Electric Trailer Brake Kit #23-105-106 are a replacement set for the 023-358-00. This kit includes a right and left brake assembly that is manually adjustable. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as…

The short answer to both of your questions is yes. You can remove the backing plate or brake assembly and use the existing hub with integrated drum by itself, or, you can simply replace it with an idler hub. Based on the photos, I would suggest…

Thanks for the photo, and you are correct, you do indeed have a Dexter 7,000 lb axle, and are also correct regarding the shoes and magnets for Dexter 7k electric brakes, the Replacement Shoe #DX28FR and Replacement Magnet #BP01-225. That said,…

The Replacement Shoe and Lining Kit #DX28FR is compatible with Dexter 12" x 2" electric trailer brake assemblies for 7,000 lb axles. I checked with Dexter, and this is also the correct replacement for the 6,000 lb brake assemblies. I am not…

I spoke with my contact at Dexter, and based on the measurements you gave me you would want the E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle, part #K71-653-00, that you referenced for your 2002 Keystone Sprinter.

Yes, you can use the Roadmaster Comfort Ride Leaf Spring Suspension Kit 8K part #RM-2460-2580 with 7,000 lb axles.

E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 7-3/4" Equalizers Item #K71-653-00 will fit in place of equalizers that are 7-1/4 to 8-1/4 inches long and up to 8,000 pound axles. Based on the information you have provided on your…

The Dexter E-Z Flex cushioned equalizers for trailer suspensions can be used to replace the similar Lippert Equa-Flex units on your toy hauler. You will want to match up the units' dimensions to ensure the suspension operates as it should with…

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

If the outside width of hanger #E4139 is 2-5/16 inches and the metal thickness is 3/16 of an inch then you would take 2-5/16 and subtract 3/16, and then subtract another 3/16, to get 1-15/16 inches. It is meant to be used with leaf springs that are…

I went out to our warehouse for you to measure the Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson part #DL22145 and have attached a photo below with this info. I believe I understood what measurements you were looking for but if I did not…