Review of CURT Weight Distribution Hitch - 1K TW MV WD With Sway Control - C17062 Video

Both Air Lift LoadLifter 5000 Ultimate Air Helper Springs, part #AL84JQ for normal springs or part #AL24JQ for internal jounce bumpers, will fit the 2WD and the 4WD versions of the 2022 Toyota Tundra so you're good to go! I always recommend…

Suspension enhancement systems can be used with a weight distribution system without any problem, in fact, a weight distribution system is going to be more effective at leveling out your load than the helper springs in the sense that it will…

For your R-pod travel trailer, the biggest issue you will face is sway , so I recommend he Strait-Line Weight Distribution System w Sway Control - Round Bar - 10,000 lbs GTW, 600 lbs TW #RP66086 which is rated for total tongue weight between 200 and…

The noise you hear will be a result of how tight you have the Friction Sway Control, #83660. The tighter it is, the more resistance there is which can lead to a lot of noise depending on how much force is being applied to it. If you want the sway…

Trailer configurations and loading, road and weather conditions, towing speed, tire condition and pressure, and center of gravity of trailer all affect towing and the degree of sway experienced. To get maximum benefits from the sway control, a series…

The product installation instructions for part #83660 doesn't specifically address backing the trailer, but if you're towing a short trailer that's prone to jackknifing or you're maneuvering into a tricky parking spot that would…

The trunnion bars on your Reese Weight Distribution System, #RP66022, should not fall out of the head assembly when driving down the road or during normal turns. When backing the trailer or turning very sharply the bar could come loose especially if…

If you are speaking of a weight distribution system that utilizes spring bars that are held in tension by chains hanging from the trailer frame, the easy way to take the tension out of the spring bar is to use the trailer jack to raise the trailer.…

Generally speaking, it is not advisable to reverse a trailer when using a weight distribution system. The system won't blow up but if you reverse at too sharp an angle then you can damage the head so you have to do so in a pretty straight line or…

The Curt MV Weight Distribution system part #C17062 that you referenced weighs 101 lbs.

I went out and pulled both the Timbren kit part #TTORTUN4 and #TTORTUN4L from our warehouse to measure them for you and found that they both sit exactly 3-3/4 inches tall.

I reached out to Timbren, who told me the the actual jounce springs are both the same height at 3-3/4 inches, but the bracket height is different. So there aren't shorter springs, and the correct fit for your 2019 Toyota Tacoma 4WD is going to…