etrailer Electric Left and Right Hand Assemblies Trailer Brake Kit Installation - 5th Wheel Video

The etrailer Electric Trailer Brakes #AKEBRK-6 will likely fit your 5,200 lb AL-KO axle. These are 12" x 2" with a 5 bolt brake flange mounting pattern. I recommend checking your brake flange just to be sure. If you have the older 4…

The center pilot hole of electric brake #AKEBRK-6R is 3-3/16 inches. The mounting pattern does have the holes spaced 2-1/8 inches apart on center except from the bottom 2 which are spaced 3 inches apart on center. I have included pictures of these…

I reached out to my contact at Dexter Axle who said that your axle is rated for 3,500 lbs and it uses inner bearing #L68149, outer bearing #L44649, and the grease seal #58846. All of these can be found in the kit #BK2-100 if you are needing to…

The correct bearing kit for your 7,000 pound Lippert axle is #BK3-210.

I can help you determine how to find the correct bearings and seals you need for your 1988 Coleman Columbia pop-up camper although there is no database which has all of the individual parts for each year, make and model of trailer. So, what you…

I'd be happy to help! For replacement brake assemblies you'll need (2) of the #AKEBRK-7-SA for 4 total assemblies (2 axles), but for the correct hubs you'll need to know your bolt pattern The hub options are: 6 on 5-1/2"…

Yes, for your Dexter 10k axles you can use the 10k brake assemblies part #AKEBRK-10R and #AKEBRK-10L that you mentioned. These were designed for your Dexter 10k axles and the slight narrower width would not be an issue at all.

The magnet clips #BP19005 should not be making contact with the drum while the brakes engage, so I do not think that is the problem. What I think is going on is it's just not seating all the way. These can get a little squished or deformed…

The brake assemblies your trailer has are #23-105 for the left hand and #23-106 will be on the right. These are 12 inches by 2 inches brakes for use on 6,000 pound axles. The replacment brake shoes you need are #AKBRKR-S-12 which are sold…

Thanks for the photo, and you are correct, you do indeed have a Dexter 7,000 lb axle, and are also correct regarding the shoes and magnets for Dexter 7k electric brakes, the Replacement Shoe #DX28FR and Replacement Magnet #BP01-225. That said,…

The correct key you need to unlock the rack is the Replacement Key for Thule Racks and Carriers part #THKEYN105. In order to rekey the hitch lock you'll need a few things; a control key to remove the old lock core once unlocked part #853-1251,…

The Electric Trailer Brake Kit #AKEBRK-6 that you referenced includes enough assemblies for both sides of an axle. This comes with a left and a right hand side.