Reese Weight Distribution without Shank Review Video

Yes, the max drop of the Curt Short Arm part #C17333 is only 1/2 inch due to the head design. For a shank that you could use with this system that would allow a 3 inch drop you would want the Curt #17120 which can do a drop of up to 5 inches. There…

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450…

The adjustment of any friction sway control system, including the Reese #83660, is relatively simple. Basically, you will drive with the trailer loaded to determine if more or less tension is needed. Then you will either make it tighter or looser…

Absolutely. Whenever the trailer weighs in at least half of the weight of the tow vehicle a weight distribution system is recommended. For your application I recommend checking out the Blue Ox TrackPro Weight Distribution w/ Sway Control #BLU36FR.…

With the 2021 Honda Passport Elite being equipped with standard all-wheel drive, you have up to 5,000 pounds of maximum towing capacity and 500 pounds of tongue weight. With that being said, it does look like you will be good to go, but I do…

Yes, 2-5/16 inch ball #63840 will fit Reese weight distribution system #RP66131. The shank length and diameter matches what the system requires.

If your loaded tongue weight is 1,350 lbs then the Reese WD System part #RP66131 that you referenced would be correct for you as it has a tongue range of 800 lbs - 1,500 lbs and yours falls in that range. Be sure that you are considering the weight…

Your absolute best solution would be to use your 1,400 lb rated Equalizer system for when you have the motorcycle loaded and then use a lighter rated head and spring bar when you aren't transporting the motorcycle. For that you would want to use…

There is no real difference in the function between the different size bars that you mentioned, as it is more something that one brand of weight distribution hitch uses to be a bit different than another brand. The only time it really makes a…

You definitely need a higher rated weight distribution system. Since you have a shank and a friction sway control unit already you would want the Reese Weight Distribution w/out Shank #RP66131. The best way to pick out a weight distribution system is…

In order to install Curt trailer hitch #C15800 on your 2012 Dodge Ram 4500 cab and chassis model you will have to drill into the frame because, like you have said, there are no holes in the frame already. The rivet that is in the rear most part of…

For your Ice Castle Fish House, the weight of the unit will determine what Equal-I-zer system will work best. A weight distribution system is based on the total tongue weight of the loaded trailer along with any cargo weight behind the rear axle of…