Customers compare RP45FR to these similar products
Products Featured in this Video
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Reese Dual Cam II weight distribution system with weight control. So this system is going to help distribute the weight of your trailer. Like most weight distribution systems, it's going to utilize the spring bar design. So spring bars are going to attach to your tow vehicle via the head unit here, and then… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Your camper is not too light for a weight distribution system and the Reese Pro Round Bar Weight Distribution item #RE34FR will work on your trailer. This system works with trailer's that have a tongue weight between 200 lbs and 600 lbs. The…
view full answer...There sure is! What you will need is a pole tongue adapter like the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW #EQ95-01-5950 which will allow you to use a Equal-i-zer or Fastway e2 weight…
view full answer...I do recommend you use a weight distribution system on the Intech Explore Travel Trailer while towing with your 2018 Toyota Highlander. The reason for this is because the weight of the trailer will be over half the weight of the vehicle which is the…
view full answer...There is a weight distribution hitch option for your new 2021 Intech Flyer Discover with a completely covered A-frame. Instead of using a standard weight distribution hitch which has brackets that go around the frame you will need to use a weight…
view full answer...Yes, the Longview Tow Mirror part #LVT-3100C that you referenced does fit your 2016 Ram 1500. I attached an install video that shows the mirror set installed on a 2016 Ram 1500 just like yours for you to check out as well.
view full answer...The etrailer Hitch Mounted Spare Tire Carrier #e98ZR that you referenced does not have a stated weight capacity but it would easily handle the weight of an 80 lb wheel and tire in the size of 245/70-19.5 so it would work well for you.
view full answer...I spoke with my contact at Curt who said that the ideal location for the brackets is 28" on your frame from the hitch ball for the Curt TruTrack #C17499. He did say that they designed this Weight Distribution (WD) system so that you have a…
view full answer...When doing your math on trailer tongue weight (TW) you do NOT need to include the actual weight of your selected weight distribution hitch, such as Curt's TruTrack #C17499, because this weight is essentially suspended between the vehicle and…
view full answer...Yes, a weight distribution system like the Curt TruTrack Weight Distribution System part #C17499 will add stress to both the trailer and vehicle frame. That said, this stress is not usually enough to cause damage. The only exceptions to this would be…
view full answer...The distance from the top of the pin hole to the bottom of the steel plate for the Stake Pocket Tie-Down Anchors part #PK-SPTD is 1-3/4" which you can see in the attached photo.
view full answer...When choosing a weight distribution hitch you'll want the tongue weight of your trailer to fall towards the middle of the prescribed range of the system; it looks like your 2022 Grand Design Imagine XLS 21BHE has a GVWR of roughly 6400-lbs, which…
view full answer...You can upgrade your Reese Strait-Line Weight Distribution System with Sway Control, 10,000 pounds GTW, 600 pounds TW #RP66082 with the 800 pound trunnion bars, #RP22225 to increase your system's tongue weight. The part number includes 1 bar, so…
view full answer...