etrailer Trailer Suspension - Leaf Spring Suspension - APTT3 Review Video

Yes, the Heavy Duty Equalizer Suspension Kit part #K71-360-00 does fit your 2008 Weekend Warrior 300FS that has a triple axle setup and a 35 inch wheelbase.

Thank you for all of that excellent information and photos! To replace the front equalizer you need the Curved Equalizer #TREQ104 and then for the rear equalizer you need the Equalizer for 1-3/4" Wide Double-Eye Springs #TREQ105. To replace your…

In the image with the suspension setup the equalizer #TREQ105 is placed between the front and second axles. Just like you have on your trailer. The front of the equalizer connects to the spring using a shackle strap and the rear is connected directly…

Any powered landing gear or powered tongue jack will draw less power as it legs descend down toward the ground and much more as soon as they make contact and encounter resistance. This is a normal occurrence. In the same way, any jack - even a manual…

What you have is a slipper spring setup on your 2015 Kaufman car trailer. So what you need for a triple axle hanger kit then is the part #APTT6SE which comes with everything needed. If you need new leaf springs too you'd want the 7k rated part…

The rebound clip is a pretty important piece on the leaf spring stack so I wouldn't really say it is okay to use your trailer without them. The rebound clips are designed to hold the leaf spring stack together so that when you hit a bump in the…

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

Slipper springs come in 1-3/4 inch, 2 inch, 2-1/2 inch and 3 inch widths. You most likely have a 2 inch spring. The number of leafs isn't the issue, but rather the weight capacity of the spring. We do have one spring that is 2 inches wide and 27…

You can measure your leaf spring (eye to eye) while it is still installed on the trailer, but first you'll want to jack up the trailer so that the leaf spring is completely unloaded. Also, it is possible that your springs are worn and stretched…

There isn't a specific distance the hangers have to be for hanger kit #AP216-H238. A good place to start is 30-1/2 inches on center but you would only really know by mocking it up on the trailer before permanently installing the hangers. To…

You are right on. Since you have 33" axle spacing and 6000lb axles on your triple axle toy hauler I recommend the Dexter Heavy Duty Suspension Kit #K71-360-00 as it was designed to work with trip axle trailers with 33" axle spacing and…