Redline Trailer Spindles RG05-100 Review Video

We have the individual components of a bearing kit available for a Dexter 4,400 lb trailer axle but since it's a rarer axle capacity we don't have a bearing kit. So for a Timken set you'd want the part #TMK49FR and #TMK56FR and then for a…

The pricing algorithm can be messed up from time to time but I do know that things like availability, supply and demand, and what other places are pricing it as well have an effect on this. I'll send in a message to our pricing team to look at…

The Spindle Nut in the Redline #RG05-100 has a 1 inch inside diameter and a 14 thread per inch thread pitch. I am in the process of having this information added to the product description.

Yes, you can switch from using a Tang Washer #5-101 to the Spindle Nut Kit #RG05-100. This kit includes 2 Retainers #6-190, 2 Nuts #6-191 and 2 D-Washers #5-23.

We don't have the UFP Brand, but I can give you some compatible parts. For your trailer hubs with rotor, I recommend the Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs #KHR10D. You will need grease seal #RG06-050 along…

Yes, you can simply use the nut retainer part #6-191 on your spindle nut instead of the tang washer setup and it would work just fine. The EZ lube fitting would not be an issue at all.

Yes, the Bearing Kit #BK2-100 are top quality for long life.

I'm glad you asked. Our etrailer brand brakes are holding up very well. We actually have an agreement with the same company who manufacture's Lippert's OEM brake assemblies, so our brakes are exactly the same as the brakes that come on…

Based on the dimensions you listed we have the part #010-180-00 which would fit and work well. This has an outer diameter of 2.33 inch and an inner diameter of 1.68 inch like you need so it would work well.

We offer a range of grease seals in various sizes. These can be seen on the link provided. You can select parts based on the seal inner and outer diameters or you can use the bearing number from your trailer to search for a grease seal. I have…

After you have your hub and bearings on your spindle you will then put on the washer, then the nut, and then the nut retainer (yellow piece) from the Nut Kit #RG05-100. The nut retainer helps to keep the nut from backing off and, ultimately, your…

There is no specific torque rating for the castle nut that holds your hub in place. We recommend tightening the castle nut down until it stops, and then backing it off to the next notch wheel the tang washer will fit into the castle nut. Over…