Recommended Spare Parts To Replace UFP Hubs With Rotors And Calipers
Question:
Sir, I have a 2008 Marine Master Tandem Axle Trailer with UFP Gold Series Oil Bath Painted Hubs and DB-35 Brakes one axle. I believe my current Rotor Hubs have something similar to 36163-IU stamped in them, and have L44649 and L68149 Bearings. I am seeking a spare Hub Rotor, bearings, Seals, and a OEM Trailer Buddy Bearing Protector Grease for emergencies. I trailer my bass boat up and down the east Cost a few times a year and am interested in carrying spare parts. I would convert to grease hubs, but my Gold Series Axle does not have a grease fitting. I figured I could carry a complete spare hub to replace either the idler or rotor hub should I have a catastrophic seal or bearing failure that did not severely damage the spindle, Can you sell me a replacement oil bath hub, and the associated parts....or the equivalent UFP Rotor Hub.
asked by: Scott W
Expert Reply:
We don't have the UFP Brand, but I can give you some compatible parts. For your trailer hubs with rotor, I recommend the Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs # KHR10D. You will need grease seal # RG06-050 along with bearing # L68149 and # L44649.
For your brakes, I recommend the Kodiak Ceramic Brake Pads w/Stainless Steel Backing Plate - 3,500 lbs to 6,000 lbs # K225CPSS along with the Kodiak Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs # KDBC225S.
For your bearing oil bath, you can use the Kodiak XL ProLube Kit for 3500-lb Axles # XLPROLUBE1980KIT. If you choose to use grease instead with a Bearing Buddy Cap, I recommend the Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair) # BB1980A-SS. When you have oil baths, the conversion is simple, you just pack your bearings with grease. If you want to convert your oil baths, you can use these caps if they fit your hubs, or you can keep the oil caps as that won't be an issue even when you use grease.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Kodiak Ceramic Brake Pads w/Stainless Steel Backing Plate - 3,500 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 3500 lbs
- 6000 lbs
- Brake Pads
- Kodiak
more information >
Kodiak Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 3500 lbs
- 6000 lbs
- Caliper Parts
- Caliper
- Kodiak
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Kodiak XL ProLube Kit for 3500-lb Axles
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 1.98 Inch
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Q&A: Parts Needed To Convert Surge Brake Triple Axle Trailer To Electric Over Hydraulic
- Video: etrailer Trailer Idler Hub Assembly Installation
- Search Results: akihub~545~35~g~ez~k
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter BrakeRite SD Adapter for Ford/Chevy Integral Brake Controllers
- Shop: Demco 32-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black - 2-5/16" Ball - 21K
- Shop: Hydrastar Electric Over Hydraulic Actuator Adapter Module for Ford and Chevy Brake Controllers
- Shop: Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi
- Shop: Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option - A-Frame - Sidewind - 2K
- Q&A: Replacement Hub for TDE46210
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Video: Review of Dexter Axle Trailer Hubs and Drums - Hub with Integrated Rotor - K08-435-05
- Video: Redline Trailer Spindles RG05-100 Review
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-258-50UC1-EZ Review
- Shop: Brake Controller
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Search Results: equalizer upgrade kit
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: oil bath bearing kits
- Search Results: kodiak lube
- Search Results: kodiak oil bath hub kit
- Search Results: oil bath hub kit
- Search Results: hub oil
- Q&A: Troubleshooting Hayes Syncronizer Trailer Brake Controller
- Q&A: Do Hub Races Have to Be Replaced Each Time Bearings Are Changed
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: How to Determine Correct Replacement Disc Brakes for EZ Loader Boat Trailer for Salt Water
- Q&A: Will Kodiak 10" Disc Brake Kit Fit UFP DB-35 Hub/Rotor