Pollak Wiring - Trailer Connectors - PK11410 Review Video

I think the best option for your 2020 Jeep Gladiator Sport w/ Rampage Mass Articulation Front Recovery Bumper is going to be the Blue Ox Bolt-On Base Plate Bracket Kit - 5,000 lbs, #BX88230. This is designed to let you create your own base plates by…

Yes, we confirmed with Progressive Dynamics that their Progressive Dynamics 4500 Series Inteli-Power Converter w/ Charge Wizard #PD4560K18LS8 that you referenced is compatible with AGM style batteries like what you have.

You can use the Optronics tailight part #STL59RB as a third brake light like you are wanting. You would just need to run the brake light circuit to the red wire and then ground to the white and you're good.

In order to use a third brake light for both brake and running light signals, you would need to use a light with turn, brake, and running light capabilities such as the Thinline LED Trailer Tail Light part #STL59RB. As most trailers are a 3 wire…

It sounds like everything is working correctly except that your top LED light is only flashing with the left turn signal and not the right turn signal. If your center light is wired like the Thinline LED Trailer Tail Light #STL59RB with the White…

The RoadMaster 4-Wire Connector #RM-910030-1 has a 1-3/4" center to center spacing for the mounting holes and would require a at minimum a 7/8" wide hole to fit the body of the connector through.

A flat 4-pole trailer harness carries three lighting circuits, brake lights, running lights and turn signals. The green wire carries right side turn and brake signals; the yellow wire carries left side turn and brake lights; and the brown wire on the…

We have trailer LED tail lights that similar to the Wesbar lights with a driver side license plate bracket that is a bit narrower than the top of the light. The light is from Optronics and measures 7-1/2 inches wide on top and the license plate…

The housing is ABS, a thermoplastic for the Optronics LED Trailer Clearance and Side Marker Light - Chrome Plated - 6 Diodes - Amber Lens #MCL81AB. If that's what you were looking for, there is also an option with a red lens, the LED Clearance…

Yes, a coupler like the Channel Tongue Coupler part #CT-3001-Z that you referenced which is designed for a 2 inch channel is designed to fit a 2 inch square tube.

For a 4-pole round trailer connector and socket, I would recommend looking at the Pollack Heavy-Duty 4-Pole Round Trailer Connector, #PK11409, and the Pollack Heavy-Duty 4-Pole Round Trailer Socket, #PK11410. The connector and socket have a…

The black wire of the Thinline LED Trailer Tail Light #STL59RB that you referenced needs to have the running light circuit ran to it. This will operate the lower illumination of the light. I'd make sure that the brown wire on each side of your…