Can Progressive Dynamics 4500 Series Inteli-Power Converter PD4560K18LS8 be Used with AGM Batteries

Question

Question:

Can this converter be used to charge AGM Batteries? Thanks.

asked by: Jerry E

1

Helpful Expert Reply:

Yes, we confirmed with Progressive Dynamics that their Progressive Dynamics 4500 Series Inteli-Power Converter w/ Charge Wizard # PD4560K18LS8 that you referenced is compatible with AGM style batteries like what you have.

expert reply by: Jameson C

1

Answer 1

Trailer brakes can be either self-adjusting like the Dexter #23-468 or may require periodic manual adjustments like #23-27, depending on the particular model assemblies you have installed on the trailer. An easy way to tell if you have…

view full answer...

Answer 2

I recommend looking at the Go Power RV Converter and Smart Battery Charger #34266912 which has a maximum output of 14.4v and is designed to work with AGM batteries. This is the most powerful converter and smart battery charger we have and it is…

view full answer...

Answer 3

Yes, you can replace the Converter #PD4045CSV in your Progressive Dynamics Mighty Mini AC/DC Panel #PD4045KA.

view full answer...

Answer 4

You'd need a new panel like the Progressive Dynamics Mighty Mini part #PD4045KA which is the most similar to your Parallax 7345 except is Lithium battery compatible. There isn't a center section replacement available for what you have…

view full answer...

Answer 5

Yes, the Progressive Dynamics inverters like the part #PD9260C that have inteli-power are compatible with AGM batteries.

view full answer...

Answer 6

Typically when the Quick Level Touch Pad #LC74FR red light flashes it indicates an error and the retract button flashing green it means that the error has been reset. The issue appears to be on the extending, so it's possible that there's…

view full answer...

Answer 7

The 18K Demco Hijacker Autoslide #DM8550034 is definitely the way you want to go, and that is not just because we carry it. When comparing the Hijacker Autoslide to the PullRite SuperGlide you actually get much more at a lower price-point. The things…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The American CS6000XL that you referenced is no longer available and there isn't a direct replacement for it but the closest solution as a replacement would be the Progressive Dynamics RV Control Center part #PD4560K18LS8 which as the same…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Can Progressive Dynamics 4500 Series Inteli-Power Converter PD4560K18LS8 be Used with AGM Batteries

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching