Blue Ox Aftermarket Off-Road Bumper Adapter Review Video

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick…

For your 2015 Jeep Wrangler Unlimited Sahara we have the Rampage Mass Articulation Front Recovery Bumper #RA88509 that fits which has 1-inch D-rings so you could use the D-Ring adapter part #BX88358 with your Blue Ox tow bar.

The Roadmaster base plate kit part #1444-3 can be used with a Blue Ox tow bar but you would need to use the adapter part #BX88185 as well.

I have a solution for you, however, I would not recommend mounting a tow bar directly to a bumper on a Jeep, whether it is OEM or an aftermarket bumper. Jeep does not recommend towing the Wrangler with the OEM bumper because it was not designed to…

If you do not have a 7/8" pin and need a larger one, you will need the Blue Ox Aftermarket Bumper Adapter - 1" Pin #BX88358. This includes pins, clips, washers, and lock nuts and will get you the clearance needed to fit your Smittybilt XRC…

That's actually a bumper that your 2017 Jeep Wrangler Unlimited Jurassic Park edition did not come with from the factory so you would need to go a different route. What you have is an Oedra bumper. Since your aftermarket bumper has D-rings…

You can definitely use the Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin #BX88357. The 1/16" space you were talking about is not too much play, it is such a small amount it won't be impactful. Drilling the holes out is not…

The diode part #RM-790 that you referenced does exactly what you are looking to do. It takes two power sources and can combine them onto one wire and prevents backfeeding from either circuit. So for what you need this would work well.

The Smittybilt XRC Gen2 bumper on the 2020 Jeep Wrangler has 3/4" thick d-rings so you can use the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars part #RM-035 to tow with the D-rings on your bumper. Smittybilt is…

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

Assuming that your tow bar is manufactured by Roadmaster, and already has safety cables, the only other item besides the #521227-1 base plate kit is wiring for the tail lights of the VW. There are three options for wiring your VW for flat towing. You…

There are a couple choices for you that will be based on the bumper you have. Blue Ox Aftermarket Bumper Adapter #BX88358 -Bumper tab thickness: 3/4", 7/8", and 1" -Pin Hole diameter: 1" Blue Ox Aftermarket Bumper Adapter #BX88357…